Specifications

40
INITIAL SETTINGS
PBX SETTING
Please note that this setting is only available in Denmark, Finland, Iceland, Norway and Sweden.
The unit is connected to a PBX, you can program it to acess automatically to public line outside PBX.
PBX setting
Use the following procedure to use the PBX settiing function :
1
Press the [MENU] key.
2
Press the [ ] key ( ) or [ ] key ( )
until "4:USER PROGRAM" appears,
and then press the [OK] key.
3
Press the [ ] key ( ) or [ ] key ( )
until "22:PBX SETTING" appears, and
then press the [OK] key.
4
Press the [ ] key ( ) or [ ] key ( )
to select "1:ON" or "2:OFF".
5
Press the [OK] key.
6
Press the [ ] key ( ) or [ ] key ( )
to select "1:FLASH" or "2:ID", and
then press the [OK] key.
7
Press the [ ] key ( ) or [ ] key ( ) "1:SET"
or "2:CLEAR", and then press the [OK] key.
8
Press the 10-key pad to enter the ID
CODE and choose a value between
0-999. Then press the [OK] key.
9
9
Press the [CLEAR ALL] key ().
Press the [CLEAR
ALL] key ( ) to exit
1,2,3,
1,2,3,
"4:USER PROGRAM"
Selection
"22:PBX SETTING"
Selection
1,2,3,
1,2,3,
1,2,3,
1,2,3,
R-key function (only activated when PBX setting is
ON) R-key allows use to dial (or register) PBX internal
numbers : to dial (or register) an internal number,
press [SPEAKER] key prior to your number. This will
add an "R" digit on LCD display to indicate that this
number is internal and will not be forwarded to the
Public Switched Telephone Network. Please note that
the speaker will not be activated in this case.
1,2,3,
1,2,3,
1,2,3,
1,2,3,
Note