Specifications

AR-FX8 MACHINE OPERATION 7-7
* For a job status result in "Display in the column of result," "NG XXXX" is displayed. " " is the code number.
For a communication result, "Communication error " is displayed.
•When the communication result is OK, the communication sub code 1 and the communication sub code 2 are "0000."
•Errors in ( ) are not used in this machine.
(2) Communication report code list 2
•For report codes 16 ~ 31, V.34 MODE COMMUNICATION.
(3) Communication report sub code
88 NG88XXXX* In SMTP e-mail receive, an attached file cannot be stored in memory.
•Cannot be stored in memory.
•The number of items of acting receive data is the maximum, and an additional
data cannot be stored.
89 NG89XXXX* In SMTP e-mail receive, an error occurs in communication with the mail server.
•Time-out occurs during e-mail receive.
90 NG90XXXX* After reservation by re-operation of document filing, conversion for image send
cannot be made.
Report code Final receive signal (Send side) Final receive signal (Receive side) Remark
0 Abnormal signal Abnormal signal
1 NSF, DIS (SID), (SUB), NSS, DCS
2 CFR (PWD), (SEP), NSC, DTC
3 FTT EOP
4MCF EOM
5 PIP, PIN MPS
6RTN, RTP PRI-Q
7 No signal, DCN DCN
8 PPR PPS-EOP
9 PPS-EOM
10 PPS-MPS, PPS-NULL
11 RNR RR
12 CTR CTC
13 ERR EOR-Q
14 PPS-PRI-Q
15
16 Abnormal signal Abnormal signal V.34 MODE COMMUNICATION
17 NSF, DIS SID, SUB, NSS, DCS V.34 MODE COMMUNICATION
18 CFR PWD, SEP, NSC, DTC V.34 MODE COMMUNICATION
19 FTT PPS-EOP V.34 MODE COMMUNICATION
20 MCF PPS-EOM V.34 MODE COMMUNICATION
21 PIP, PIN PPS-MPS, PPS-NULL V.34 MODE COMMUNICATION
22 RTN, RTP PRI-Q V.34 MODE COMMUNICATION
23 No signal, DCN DCN V.34 MODE COMMUNICATION
24 PPR V.34 MODE COMMUNICATION
25 RNR RR V.34 MODE COMMUNICATION
26 CTR CTC V.34 MODE COMMUNICATION
27 ERR EOR-Q V.34 MODE COMMUNICATION
28 PPS-PRI-Q V.34 MODE COMMUNICATION
29 V.8Phase-1 V.8Phase-1 V.34 MODE COMMUNICATION
30 V.8Phase-2 V.8Phase-2 V.34 MODE COMMUNICATION
31 V.8Phase-3 V.8Phase-3 V.34 MODE COMMUNICATION
Report code 2 Content of communication interruption Send/Receive
01 Send length over Send
02 EOL time up Receive
03 Carrier detection time up Receive
04 Not used -
05 Time up in phase C (8 min) Send
06 Memory image decode error Receive
07 Memory image decode error Send
Report code
(Communication
result)
Display in the column of result Content of communication interruption
Means of
communication
[07]MACHINEOPERATION.fm 7 ページ ２００３年１１月１２日 水曜日 午前９時４８分