Specifications

AR-FX8 MACHINE OPERATION 7-2
*2 Only when the duplex module is installed.
*3 The trays that can be selected will vary depending on what peripheral devices have been installed.
2. Originals that can be faxed
A. Original sizes
NOTE
Originals that are not a standard size (5-1/2" x 8-1/2", 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14", 11" x 17") can also be faxed.
B. Automatic reduction of faxed document
If the size (width) of the faxed document is greater than the receiving machine's paper size, the size will be automatically reduced.
A document can also be faxed without reducing its size. In this case, the left and right edges will not be transmitted.
KEY OPERATOR PROGRAM
Set value(Default)
Remark
Engine section LCD
Fax
receive
settings
Auto receive reduce setting Enable*/ Disable
Number of calls in auto reception 0, 1, 2* ~ 15
Duplex reception setting*2 Enable/ Disable*
Print style setting Print actual size cut off disable/
Print actual size cut off enable/Auto size select*
Set the telephone number for data forwarding
Fax output tray setting*3
Anti junk fax setting Enable/Disable*
Fax polling
security
Fax polling security Allowed/Not allowed*
Passcode number setting
Set number of times public box may be polled Automatically clear*/Not clear
Minimum original size Maximum original size
Using the auto document feeder 8-1/2" (width) x 5-1/2" (length)
5-1/2" (width) x 8-1/2" (length)
11" (width) x 3-1/2" *(length)
*Long documents can be loaded
Using the document glass 11" (width) x 17" (length)
Faxed document width Receiving machine's paper width Reduced size Ratio
11" x 17" 8-1/2" x 14" 8-1/2" x 14" 1 : 0.64 (Area ratio)
11" x 17" 8-1/2" x 11" 8-1/2" x 11"R 1 : 0.5 (Area ratio)
8-1/2" x 14" 8-1/2" x 11" 8-1/2" x 11"R 1 : 0.78 (Area ratio)
[07]MACHINEOPERATION.fm 2 ページ ２００３年１１月１２日 水曜日 午前９時４８分