Specifications

AR-FX8 MACHINE OPERATION 7-1
[7] MACHINE OPERATION
1. Key operator program
*1 This setting is only effective if the other machine is a G3 machine that supports ECM.
*2 Only when the duplex module is installed.
*3 The trays that can be selected will vary depending on what peripheral devices have been installed.
KEY OPERATOR PROGRAM
Set value(Default)
Remark
Engine section LCD
Operation
settings
Default display setting [ADDRESS BOOK] (ABC)/
[ADDRESS BOOK] (Group)/[FAX]
(when the network scanner option is installed)
[E-MAIL/FTP]/[INTERNET-FAX]
SWITCH AUTOMATICALLY TO COPY MODE
SCREEN
The number of direct address keys
displayed setting
6*/8/12
Must input next address key at broadcast setting omit*/not omit
The number of file name/subject keys displayed
setting
3/6
Initial resolution setting standard*/fine/fine(half tone)/super fine/
super fine(half tone)/ultra fine/ ultra fine(half tone)
Scan complete sound setting Low*/High
Default exposure settings Auto*/Manual
Fax
default
settings
Fax own number and name set
Dial mode setting Tone*/Pulse
Auto wake up print Enable*/ Disable
Pause time setting 1,2* ~ 15sec
Speake volume settings Speaker Low/Medium*/High
Ringer volume Low/Medium*/High /Off
Line monitor Low/Medium*/High /Off
Fax receive Low/Medium*/High /Off
Fax comm error Low/Medium*/High /Off
Original print on transaction report Enable*/ Disable / Print out error report only
Remote reception number setting 0 ~ 5* ~ 9
Transaction report print select setting Single sending Print out all report/Print out error report only*/
No printed report
Broadcasting Print out all report*/Print out error report only/
No printed report
Receiving Print out all report/Print out error report only/
No printed report*
Confidential reception Print out notice page*/Not print out notice page
Activity report print select setting Auto print
at memory full
Yes/No*
Print daily
at designated time
Yes (hour/minute)/No*
ECM*1 Enable/ Disable*
Distinctive ring detection Pattern1 ~ 5/OFF*
Fax send
settings
Auto reduction sending setting Enable*/ Disable
Rotation sending setting Enable*/ Disable
Printing page number at receiver Enable*/ Disable
Call timer at memory sending 30/45*/60sec
Date/own number print position setting Outside the original image*/Inside the original image
Recall in case of line busy Enable*/ Disable
Recall in case of communication error Enable*/ Disable
Quick on line sending Enable*/ Disable
[07]MACHINEOPERATION.fm 1 ページ ２００３年１１月１２日 水曜日 午前９時４８分