Specifications

AR-FX8 SIMULATIONS, FAX SOFTWARE SWITCH 6-29
9 7,8 Not used 0
0
10 1-4 Ring back tone ON time Used to set the pseudo-ringing to an external telephone and the ring back tone
ON time to the line.
Setting can be made in the range of 0 ~ 3sec in the increment of 200ms.
When set to 0, however, same as setting to 1sec.
0 1sec
1
0
1
5-8 Ring back tone OFF
time
Used to set the pseudo-ringing to an external telephone and the ring back tone
OFF time to the line.
Setting can be made in the range of 0 ~ 3sec in the increment of 200ms.
When set to 0, however, same as setting to 2sec.
When set to less than 2sec, busy tone may be erroneously detected.
1 2sec
0
1
0
11 1-4 Image quality priority
selection (Standard
image quality setup)
Used to set the initial setting of image quality selection when a document is
scanned by FAX. .
0 Normal text Operation
setup
0
0
0
5 Automatic wake up
mode
Used to set whether the machine is automatically wake up and the received
document is outputted or the received document is saved in memory and will be
outputted when the power is turned on next time when a FAX message is
received with the main SW ON and the FAX power SW ON or in the power save
mode.
0 Output Initial setup
6 Not used 0
7 Image quality setup
when saving
Used to set whether the initial setting of image quality selection in FAX send of
a filed document is set to "Enable filed image quality" or not.
0 Not applied Operation
setup
8 Selection of resend
page in case of an error
Used to select resend pages in case of an error in transmission without F code.
If transmission includes F code, all pages are resent.
0 After the
error page
12 1-8 External telephone off-
hook detection time
Used to set the time to recognize external telephone off-hook detection.
The set range is 0ms - 255ms in the increment of 10ms by binary input.
0 300ms
0
0
1
1
1
1
0
13 1-8 Remote switch number
setup
Used to set the number for remote switch receive from an external telephone by
binary input.
However, remote switch numbers of "XX*" and "*" are fixed.
When set to "C" (BCD) or above, same as setting to the initial value of "5"
(BCD).
0 5* Initial setup
1
0
1
1
0
1
0
14 1 Remote reception
instruction
Used to set YES/NO of remote switch from an external telephone. 0 YES
SW
No.
Bit
No.
Item Switch selection and function USA Initial value Key
operator
Bit No. 1234
Normal text 0000
Fine 0001
Super fine 0010
Ultra fine 0011
Fine (Half tone) 0101
Super fine (Half tone) 0110
Ultra fine (Half tone) 0111
1: Saved in memory
without booting
machine
0: Output by automatic
booting of machine
1: Applied 0: Not applied
1: All pages
(Resend all pages from the
first page including
transmitted pages.)
0: After error page
(Resend after error
page)
55 (Japan) 5* (Outside Japan)
1: NO (remote switch
disable)
0: YES (Remote switch
enable)
[06]SIMULATIONS ･ FAXSOFTWARESWITCH.fm 29 ページ ２００３年１１月１２日 水曜日 午前９時４５分