Service manual

AR-FX7 KEY OPERATOR PROGRAM 8 - 1
[8] MACHINE OPERATION
1. Key operator program
A. List
Key operator program Set value (∗: Default value) Remarks
Fax
default
settings
Default display settings Condition settings∗ / Address book (ABC) /
Address book (Group)
Must input next address key at broadcast setting ON / OFF∗
The number of direct address keys displayed setting 6∗ / 8 / 12 (keys)
Initial resolution setting Standard∗ / Fine / Super fine / Ultra fine Half tone cannot be
selected for standard
resolution.
Initial exposure setting Auto∗ / Manual (1 – 5)
Own number and name set Registering / Un-registering∗
Dial mode setting Tone∗ / Pulse
Pause time setting 1 – 15 (Increment of 1sec.) 2∗ (sec.)
Speaker volume setting Speaker Small / Medium∗ / Great
Ringer volume Small / Medium∗ / Great / No sound
Line monitor Small / Medium∗ / Great / No sound
Transmission complete sound Small / Medium∗ / Great / No sound
Transmission complete sound setting Pattern 1 / Pattern 2∗ / Pattern 3
Transmission complete sound time setting 2.0 / 2.5 / 3.0∗ / 3.5 / 4.0 (sec.)
Activity report print
select setting
Auto print at memory full ON / OFF∗
Print daily at designated time ON / OFF∗
Transaction report print
select setting
Single sending Print out all report / Print out error report only∗ /
No printed report
Broadcasting Print out all report∗ / Print out error report only /
No printed report
Receiving Print out all report / Print out error report only /
No printed report∗
Confidential reception Print out notice page∗ / Not print out notice page
Image memory print select setting Print out all report / Print out error report only∗ /
No printed report
Remote reception number setting 0 – 9 5∗ Only when an extension
phone is connectedExternal telephone setting ON∗ / OFF
Distinctive ring detection STANDARD/PATTERN 1 – 5 / OFF∗
FAX
send
settings
Auto reduction sending setting ON∗ / OFF
Printing page number at receiver ON∗/ OFF
Date/own number print position setting Outside the original image∗ / Inside the original
image
Rotation sending setting ON∗ / OFF
Call timer at memory sending 30 / 45∗ / 60 (sec.)
Recall in case of line
busy
Number of times 1 – 15 2 (times)∗
Interval 1 – 15 3 (min.)∗
Recall in case of
communication error
Number of times 1 – 15 1 (times)∗
Interval 0 – 15 1 (min.)∗
Quick on line sending ON* / OFF
Default sending mode Memory sending∗ / Direct sending
Auto cover sheet ON / OFF∗
Slow scan mode ON / OFF∗
FAX
receive
settings
Auto receive reduce setting ON∗ / OFF
Duplex reception setting ON / OFF∗
Print style setting Print actual size cut of enable / Auto size select∗
Number of calls in auto reception 0 – 15 2∗ (times)
Set the telephone number for data forwarding Registering / Un-registering∗
Index print ON / OFF∗
Received data print condition ON∗ / OFF
A3 RX reduce ON / OFF∗
Enter junk fax number Registering / Un-registering∗
ANTI JUNK FAX ON / OFF∗
Sending
options
Passcode number setting Registering / Un-registering∗
Polling security setting ON∗/ OFF
ID number mode Registering / Un-registering∗ This method can only be
used if the other machine
is also a Sharp machine
(excluding certain
models).
System number mode Registering / Un-registering∗
Relay passcode Registering / Un-registering∗
Confidential code set Registering / Un-registering∗
F-code memory box Polling memory Registering / Un-registering∗
Confidential Registering / Un-registering∗
Relay broadcast Registering / Un-registering∗