Service manual

AR-FX7 SPECIFICATIONS 2 - 1
[2] SPECIFICATIONS
1. Communication system
(1) Electronic transmission system
2. Scanning system
(1) Document size
(2) Transmission mode document load quantity scan
cycle (RSPF capacity)
3. Image process system
(1) Half-tone reproduction density adjustment
(2) Image selection
(3) Print resolution
4. Print system
(1) Recording size
(2) Recording paper
5. Transmission function system
(1) Simplified dialing function
(2) F-code communication
(3) Time specification
(4) Recall mode
(5) Automatic reduction transmission
(6) Memory transmission/direct transmission
Transmission time Less than 3 sec (Super G3/33600bps)
Less than 6 sec (G3 ECM/14400bps)
Compression system MH, MR, MMR, JBIG
Modem speed 33600bps → 2400 auto fall back
Mutual
communication
Super G3/G3
Employed line Public Switched Telephone Network
(PSTN), Private Branch Exchange (PBX)
Number of employed
lines
One line
ECM YES
Max. document
width
297mm (11.7")
Unscanable area Lead edge 5mm or less, rear edge 5mm or less
left & right edges 6mm or less
Auto
detection
size
OC 11 x 17/8.5 x 14/8.5 x 11/8.5 x 11R/5.5 x 8.5
RSPF 11 x 17/8.5 x 14/8.5 x 11/8.5 x 11R/5.5 x 8.5/
5.5 x 8.5R
Document size
specified
11 x 17/8.5 x 14/8.5 x 11/8.5 x 11R/5.5 x 8.5/
5.5 x 8.5R/A4/A4R
Duplex document
specified
YES
Long document Max. 1000mm
(A3 width 297mm/except when super fine)
RSPF/OC
transmission select
NO (Selection inhibited during scanning of a
document)
Continuous auto
paper feed
YES
Document load
capacity
RSPF: 100 sheets
Document scan cycle 40 pages/min (Normal, A4R memory
transmission)
Document scan
speed
About 1.5sec/page (Normal, A4R memory
transmission)
Job build (Large
document mode)
YES
Thin paper scan YES
Half-tone Equivalent to 256 gradations (Combination
of fine/super fine/ultra fine is possible.)
Density selection Auto/manual in 5 steps
Normal 8dot/mm x 3.85line/mm
Fine 8dot/mm x 7.7line/mm
Super fine 8dot/mm x 15.4line/mm
Ultra fine 16dot/mm x 15.4line/mm: ITU-T conforming
600dpi (with resolution correction)
Max. record width 293mm (11.5")
Recording paper
size detection
YES (All sizes except for multi paper feed.
→
Recognition of the set size. The tray has no
function to detect the actual paper size.)
Recording paper
size
11 x 17/8.5 x 14/8.5 x 11/8.5 x 11R/5.5 x 8.5/A4/
A4R
Recording paper
empty detection
YES
Paper feed All installed trays except for multi-manual
tray.
Reception paper full
detection
YES
Rapid key dialing/
Group dialing
registration per
500 items (Total volume of rapid key and
group dialing)
Chain dialing YES
Redialing The preceding number in single address
transmission is registered. (except time
specification)
Not cleared even by clear all key
Mode recall NO
Sub address YES (Max. 20 digits)
Password YES (Max. 20 digits)
Time specification:
Transmission/polling
Time is specified in transmission/polling.
Call time in automatic
send
30sec / 45sec / 60 sec
Default: 45 sec
Auto recall mode
when other party
is busy.
Interval 1min to 15min, default 3min
Number of
times
1 to 14 times / No resend
Default 2 times
Recall mode
when in a
communication
error
Interval 1min to 15min / 0: Resend
immediately after disconnection of
the line
Default: Once
Number of
times
Once / No resend
Default 1 time
Send page After the error page
Number of transmissions
counted in recall mode
simultaneously.
Max. 50 items
Subsequent transmission
reservation override in recall
mode
NO
YES (ON/OFF by key operator program)
Memory transmission YES
Number of reservation
to be set
Max. 50 items
Process in memory full Transmission cancel or only
scanned data transmission
Quick online transmission YES (Enable/Disable setup by key
operator program)
Direct transmission YES (100 pages from RSPF, only 1
page from OC)
Default setup Set by key operator program