Service manual

AR-FX7 SOFT SWITCH 7 - 16
S
W
69
1 Reception size specification
(Reception capacity)
Bit No. 1 2
By the equipped
cassette
0
By the equipped
cassette
00
2 B4 (A4, B4) 0 1
0A4 1 0
A3 (A4, B4, A3) 1 1
3 11 inch reception capacity
setup
1: 255mm or 215mm 0: 303mm, 255mm or 215mm 303mm, 255mm
or 215mm
0
4 Maximum reception length 1: Unlimited 0: 1.5m 1.5m 0
5 Image quality in
transmission request
Bit No. 5 6
Ultra fine
0Ultra fine 0 0
Super fine 0 1
6Fine10
0
Standard 1 1
7 Countermeasures for echo
in reception (CED tone
send interval)
1: 500ms 0: 75ms
75ms 0
8 Countermeasure for echo in
transmission (After
reception of DIS, hold time
up to signal send is set.)
1: 500ms 0: 200ms
200ms 0
S
W
70
1 CED signal send 1: Yes 0: No Yes 1
2 CSI transmission 1: Yes 0: No Yes 1
3 DIS reception check in G3
send
1: 2 times 0: 1 time
1 time 0
Functions only when
other than SG3.
4 DIS process selection in
reception
Bit No. 4 5
Judged as
reception of an
echo and the
command is sent
again.
0
Judged as reception of an echo and the command
is sent again.
00
Disconnects the line as an illegal DIS 0 1
5 When DIS judges that the receiver has poled
documents, poled transmission and the other are
judged as reception of an echo and the command
is sent again.
10
0
When DIS judges that the receiver has poled
documents, poled transmission is made. When DIS
judges that the transmitter received an echo, the
command is sent again. In the other case, it is
judged as improper DIS and the line is
disconnected.
11
6 DIS 41Bit or later enable/
disable
1: Void 0: Valid
Valid 0
7 Time between DCS and
TCF
1: 75ms 0: 150ms
75ms 1
8 TCF check time 1: 1.0sec 0: 1.3sec 1.0sec 1
S
W
71
1 Inhibited to use 0
2 0
3 0
4 Telephone line menu 1: Inhibited 0: Allowed Allowed 0 Allowed fixed
5 Inhibited to use 0
6 0
7 1
8 0
SW
No.
Data
No.
Items SW selection and functions Default value Remarks