Service manual

AR-FX7 SIMULATION 6 - 5
Operation/procedure
1. Select "1: COPY START."
The currently set value is highlighted beside the item.
2. Enter the correction value with the 10-key, and press the [#/P] key.
3. Press the [START] key.
Copying is started.
There is no tray selection operation.
The optimum paper tray for the scanned size is selected.
4. Select the scanning method.
Even when the SPF/RSPF is selected, if there is no original on the
SPF/RSPF, the OC is scanned.
Even when the OC is selected, if there is any original on the SPF/
RSPF, the SPF/RSPF is scanned. (Setting 2)
Note: Executable only when the FAX is installed.
Operation/procedure
1. Select "1: COPY START."
The currently set value is highlighted beside the item.
2. Press the [START] key.
Copying is started.
There is no tray selection operation.
The optimum paper tray for the scanned size is selected.
When two pages are scanned, duplex print is made,
Note: Executable only when the FAX is installed.
Operation/procedure
1. Enter the soft SW number to be selected with the 10-key.
2. Check and change the setting content of the selected soft SW.
3. Press the [START] key to save the set content.
The FAX-related soft SW is displayed on the LCD, and changing can
be made by monitoring it.
Note: Executable only when the FAX is installed.
50
50-8
The adjustments on the machine side must have been normally
completed.
Purpose Adjustment
Function (Purpose) FAX lead edge adjustment (read)
Section FAX
Normal display NOW PRINTING
Error display DOOR OPEN
JAM
PAPER EMPTY
Item Content
Setting
range
Default
1 COPY START Copy start ––
2 SCAN
SELECT (OC/
SPF/RSPF)
Scan selection (1: OC, 2:
SPF, 3: RSPF back) 1-3 1
3 LEAD Scan lead edge position
adjustment value of the
selected method in 2.
43-57 50
4 LEFT Scan left edge position
adjustment value of the
selected method in 2.
43-57 50
5 REAR Scan rear edge position
adjustment value of the
selected method in 2.
43-57 50
6 RIGHT Scan right edge position
adjustment value of the
selected method in 2.
43-57 50
128
128
128
128
2
50
50
50
2
50-9
Purpose Adjustment
Function (Purpose) FAX lead edge adjustment (print)
Section FAX
Normal display NOW PRINTING
Error display DOOR OPEN
JAM
PAPER EMPTY
Item Content
Setting
range
Default
1 COPY START Copy start ––
2 LEAD Print lead edge void
adjustment value (Front
surface)
43-57 50
3 LEFT Print left edge void
adjustment value (Front
surface)
43-57 50
4 REAR Print rear edge void
adjustment value (Front
surface)
43-57 50
5LEAD
(DUPLEX)
Print lead edge void
adjustment value (Back
surface)
43-57 50
6 LEFT (DUPLEX) Print left edge void
adjustment value (Back
surface)
43-57 50
7REAR
(DUPLEX)
Print rear edge void
adjustment value (Back
surface)
43-57 50
66
66-1
Purpose Setting
Function
(Purpose)
Used to change and check the FAX-related soft SW.
Section FAX
1