Service manual

AR-FX7 SIMULATION 6 - 4
3. Press the [START] key.
Copying is started and the set value is stored.
There is no tray selection operation.
The optimum paper tray for the scanned size is selected.
Note: Executable only when the FAX is installed.
Operation/procedure
1. Select "1: COPY START."
The currently set value is highlighted beside the item.
2. Enter the set value of magnification with the 10-key, and press the
[#/P] key.
3. Press the [START] key.
Copying is started and the set value is stored.
There is no operation of tray selection.
The optimum paper tray for the scanned size is selected.
Even when the SPF/RSPF is selected, if there is no original on the
SPF/RSPF, the OC is scanned.
Even when the OC is selected, if there is any original on the SPF/
RSPF, the SPF/RSPF is scanned. (Setting 2)
* The adjustment can be made in the range of -12.7% - +12.7% by the
increment of 0.1%.
Note: Executable only when the FAX is installed.
Operation/procedure
1. Select "1: COPY START."
The currently set value is displayed beside the item.
2. Press the [START] key.
Copying is started and the set value is stored.
There is no operation of tray selection.
The optimum paper tray for the scanned size is selected.
When two pages are scanned, duplex printing is made.
Note: Executable only when the FAX is installed.
Normal display NOW PRINTING
Error display DOOR OPEN
JAM
PAPER EMPTY
Item Content
Setting
range
Default
1 COPY START Copy start ––
2 EXP.LEVEL Exposure level selection
0 - 99 50
3 AE (PHOTO ON) Ultra Fine AE (Half
tone)
4 AE (PHOTO OFF) Ultra Fine AE
5 MANUAL
(PHOTO ON)
Ultra Fine MANUAL
(Half tone)
6 MANUAL
(PHOTO OFF)
Ultra Fine MANUAL
48
48-8
Purpose Adjustment
Function
(Purpose)
FAX magnification adjustment (read)
Section FAX
Related soft SW SW112-1 to 8, SW113-1 to 8
Normal display NOW PRINTING
Error display DOOR OPEN
JAM
PAPER EMPTY
Item Content
Setting
range
Default
1 COPY START Copy start ––
2 SCAN SELECT
(OC/SPF/RSPF)
Scan selection (OC/
SPF/ RSPF)
1-255* 128
3 OC(MAIN) SCAN Main scanning
magnification ratio
adjustment (OC)
1-255* 128
50
50
50
50
1
4 OC(SUB) SCAN Sub scanning
magnification ratio
adjustment (OC)
1-255* 128
5 SPF(MAIN) SCAN Main scanning
magnification ratio
adjustment (SPF)
1-255* 128
6 SPF(SUB) SCAN Sub scanning
magnification ratio
adjustment (SPF)
1-255* 128
7 RSPF(MAIN) SCAN Main scanning
magnification ratio
adjustment (RSPF)
1-255* 128
8 RSPF(SUB) SCAN Sub scanning
magnification ratio
adjustment (RSPF)
1-255* 128
48-9
Purpose Adjustment
Function (Purpose) FAX magnification adjustment (print)
Section FAX
Normal display NOW PRINTING
Error display DOOR OPEN
JAM
PAPER EMPTY
Item Content
Setting
range
Default
1 COPY START Copy start 1-255 128
2 Horizontal Print magnification ratio
adjustment (Horizontal, vertical
to paper passing)
1-255 128
3 Vertical Print magnification ratio
adjustment (Vertical, parallel to
paper passing)
1-255 128
4 Horizontal
(DUPLEX)
Print magnification ratio
adjustment on the back surface
(Horizontal, vertical to paper
passing)
1-255 128
5Vertical
(DUPLEX)
Print magnification ratio
adjustment on the back surface
(Vertical, parallel to paper
passing)
1-255 128
Item Content
Setting
range
Default
1
128
128
128
128
128
128
2