Specifications

AR-FX5 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4-2
2. FAX mode (Condition setting screen)
The condition setting screen of fax mode is displayed by pressing the IMAGE SEND key while the print mode, copy mode, or job status screen appears
in the touch panel. In the explanations that follow, it is assumed that the initial screen that appears after pressing the IMAGE SEND key is the condition
setting screen (shown below). If you have set the display to show the address directory (following page) when the IMAGE SEND key is pressed, touch
the CONDITION SETTINGS key in the address directory to display the condition setting screen.
The key operator program can be used to set the display to show either the condition setting screen (shown below) or the address directory screen
(following page) when the IMAGE SEND key is pressed.
A.Condition setting screen
The display is initially set (factory setting) to show the following condition setting screen as the initial screen.
1 Message display Messages appear here to indicate the current status of the machine.
When the machine is ready to send, an icon appears to the left.
2 Memory and reception mode display This shows the amount of fax memory that is free and the currently selected reception mode.
3 SPEAKER key This key is used for dialing with the speaker. During dialing it changes into the PAUSE key, and after
pressing the SUB ADDRESS key it changes into the SPACE key.
4 REDIAL key Touch this key to redial the most recently dialed number. After dialing, this key changes into the NEXT
ADDRESS key.
5 ADDRESS DIRECTORY key This displays the Address Directory screen (next page).
Touch this key when you want to use an auto-dial number (one-touch dialing or group dialing).
6 SUB ADDRESS key Touch this key to enter a sub-address or passcode.
7 ADDRESS REVIEW key When performing a broadcast transmission, touch this key to check your selected destinations.
Your selected destinations will appear as a list, and the list can be edited.
8 Two-sided scanning and verification
stamp icon display
Icons appear here when you touch the ORIGINAL key and select two-sided scanning and/or the verification
stamp function (when the optional verification stamp unit is installed).
The icons can be touched to open function selection screens.
9 ORIGINAL key Touch this key when you wish to manually set the size of the original to be scanned, scan both sides of the
original, or use the verification stamp option.
10 RESOLUTION key Touch this key to change the resolution setting for the original to be scanned.
The selected resolution setting will be highlighted above the key. The initial factory setting is STANDARD.
11 SPECIAL MODES key Touch this key to select one of the following special functions:
•Timer transmission •Polling •Dual page scan •Exposure •Program •Memory box
12 Special function icon display When a special function such as polling or dual page scan is selected, a special function icon appears here.
SPECIAL MODES
AUTO
READY TO SEND.
ORIGINAL
STANDARD
RESOLUTION
SUB ADDRESS
ADDRESS REVIEW
REDIALSPEAKER
FAX MEMORY:100%
AUTO RECEPTION
ADDRESS
DIRECTORY