Specifications

AR-FX5 MACHINE OPERATION 7-2
2. FAX power switch
For the facsimile features to function, the power switch located on the expansion kit box must be turned on.
3. Originals that can be faxed
A. Original sizes
NOTE: Originals that are not a standard size (5-1/2"x8-1/2", 8-1/2"x11", 8-1/2"x11"R, 8-1/2"x14", 11"x17") can also be faxed.
B. Scanning area of original
Note that the edges of an original cannot be scanned.
Area that cannot be scanned : 0.2" or less at top edge and 0.2" or less at bottom edge
: Near edge + far edge = 0.2" or less
C. Automatic reduction of faxed document
If the size (width) of the faxed document is greater than the receiving machine's paper size, the size will be automatically reduced.
A document can also be faxed without reducing its size. In this case, the left and right edges will not be transmitted.
Minimum original size Maximum original size
Using the auto document feeder 8-1/2" (width) x 5 -1/2" (length) 11" (width) x 31-1/2"*(length) *Long documents can be loaded
Using the document glass 5-1/2" (width) x 8-1/2" (length) 11" (width) x 17"(length)
Faxed document width Receiving machine's paper width Reduced size Ratio
11"x17" 8-1/2"x14" 8-1/2"x14" 1 : 0.64 (Area ratio)
11"x17" 8-1/2"x11" 8-1/2"x11"R 1 : 0.5 (Area ratio)
8-1/2"x14" 8-1/2"x11" 8-1/2"x11"R 1 : 0.78 (Area ratio)
T
E
L
LINE
OFF
ON
FAX power
switch
Far edge
Near edge
Top edge Bottom edge
Area that cannot be scanned