Specifications

AR-FX5 MACHINE OPERATION 7-1
[7] MACHINE OPERATION
1. Key operator program
*1 Can only be selected if the optional verification stamp unit is installed.
*2 This setting is only effective if the other machine is a G3 machine that supports ECM.
*3 Only when the duplex module is installed.
*4 The trays that can be selected will vary depending on what peripheral devices have been installed.
KEY OPERATOR PROGRAM
Set value(Default)
Remark
Engine section LCD
Operation
settings
Default display setting Condition setting screen*/ Address directory (ABC)/
Address directory (Group)
The number of direct address keys
displayed setting
6/8*/12
Must input next address key at broadcast setting omit*/not omit
Initial resolution setting standard*/fine/fine(half tone)/super fine/
super fine(half tone)/ultra fine/ ultra fine(half tone)
Default verification stamp *1 Enable/Disable*
Fax
default
settings
Own number and name set
Dial mode setting tone*/10PPS/20PPS
Auto wake up print Enable*/ Disable
Pause time setting 1,2* ~ 15sec
Speaker volume setting Speaker Low/Medium*/High
Ringer volume Low/Medium*/High /Off
Line monitor Low/Medium*/High /Off
Original print on send error report Enable*/ Disable
Remote reception number setting 00 ~ 55* ~ 99
Transaction report print select setting Single sending Print out all report/Print out error report only*/
No printed report
Broadcasting Print out all report*/Print out error report only/
No printed report
Receiving Print out all report/Print out error report only/
No printed report*
Confidential reception Print out notice page*/Not print out notice page
Activity report print select setting Auto print
at memory full
Yes/No*
Print daily
at designated time
Yes/No*
ECM*2 Enable/ Disable*
Distinctive ring detection Enable/ Disable*
Fax send
settings
Auto reduction sending setting Enable*/ Disable
Rotation sending setting Enable*/ Disable
Printing page number at receiver Enable*/ Disable
Call timer at memory sending 20/45*/60sec
Date/own number print position setting Outside the original image*/Inside the original image
Recall in case of line busy Enable*/ Disable
Recall in case of communication error Enable*/ Disable
Times of recall setting in case of line busy 1,2* ~ 15
Interval of recall setting 1 ~ 3* ~ 15min
Quick on line sending Enable*/ Disable
Fax
receive
settings
Auto receive reduce setting Enable*/ Disable
Number of calls in auto reception 0 ~ 2* ~ 15
Duplex reception setting*3 Enable/ Disable*
Print style setting Print actual size cut off disable/
Print actual size cut off enable/Auto size select*
Set the telephone number for data forwarding
Fax separator page Enable*/ Disable
Output tray setting*4
Fax polling
security
Polling security setting Allowed/Not allowed*
Passcode number setting
Set number of times public box may be polled Automatically clear*/Not clear