Specifications

AR-FX5 SIMULATIONS, FAX SOFTWARE SWITCH 6-47
74 1-8 Not used 0
0
0
0
1
1
0
1
75 1-4 Lower limit of call signal
ON time
Used to set the lower limit of ON time for detection of pulses (number of times) of
call signal (CI). When CI signal ON is detected for more than the set time, it is
counted as 1 pulse.
The lower limit of ON time can be set in the range of 150 - 300ms by binary input of
N (0 - 15) into "N x 10 + 150ms."
This switch substitutes for the sine wave of CI detection.
0 150ms
0
0
0
4-8 Upper limit of call signal
ON time
Used to set the upper limit of ON time for detection of pulses (number of times) of
call signal (CI). When CI signal ON is detected for less than the set time, it is
counted as 1 pulse.
The upper limit of ON time can be set in the range of 3000 - 4500ms by binary
input of N (0 - 15) into "N x 100 + 3000ms."
0 3000ms
0
0
0
76 1-4 Lower limit of call signal
OFF time
Used to set the lower limit of call signal (CI) OFF time for detection of pulses
(number of times). When a CI signal OFF is detected for mote than the set OFF
time, it is judged as 1 pulse. The lower limit of OFF time can be set in the range of
0 - 150ms by binary input of N into "N x 100ms."
0 700ms
1
1
1
5,6 Upper limit of call signal
OFF time
Used to set the upper limit of wait time from pulse (number of times) detection of a
call signal (CI) to the next CI signal pulse. When the next CI signal pulse is not
detected within the set range, the number of calls until then is cleared.
0 5sec
0
7,8 Not used 0
0
77 1-4 Call signal OFF non-
detection time
Used to set the time to ignore OFF signal and regard as ON time continuing after
detection of call signal (CI) ON. This is to process PBX call signal (Ring, Ring) as
one call signal.
The set range is 0 - 150ms in the increment of 100ms by binary input.
0 600ms
1
1
0
5-8 Distinctive ring Used to set whether FAX ringing by distinctive ring is made or not. Though a call
signal other than the set pattern is detected, automatic ringing is not performed.
This distinctive ring is used only in North America and Australia.
0OFF
0
0
0
78 1-8 Not used 0
0
0
0
0
0
0
0
SW
No.
Bit
No.
Item Switch selection and function Initial value
Key
operator
Bit No. 5 6
5sec 0 0
10sec 0 1
15sec 1 0
20sec 1 1
Bit No. 5678
OFF 0000
STANDARD 0 0 0 1
Pattern4 0 0 1 0
Pattern2 0 1 0 0
Pattern1 1 0 0 0
Pattern5 1 0 1 0
Pattern3 1 1 0 0