Specifications

AR-FX5 SIMULATIONS, FAX SOFTWARE SWITCH 6-45
67 1-4 DTMF send level
(High group-Low group)
setup
Used to set the difference between the high level and the lower level of DTFM
signal in the unit of 0.5dB.
0 2dB Adjustment
value
0
0
0
5-8 Not used 0
0
0
0
68 1-5 DTMF signal send time Used to set the DTFM signal send time when DTFM signal is transmitted.
The set range is 0 - 31 by binary input of N into "10ms x N" (70ms - 310ms).
If set to outside the set range, it is set to the default (110ms).
0 110ms
1
0
1
1
6 Not used 0
7,8 1300Hz detection time Used to set the judgment time for detection of a signal (1300Hz) sent from the
switch board (NTT) when making contract of F net.
When this item is not set, 1300Hz signal is ignored and not detected.
0NO
0
69 1-8 DTMF minimum pause
time setup
Used to set the minimum pause time between DTMF signals when DTFM signal is
transmitted. The set range is 0 - 31 by binary input of N into "10ms x N" (70ms -
310ms).
If set to outside the set range, it is set to the default (110ms).
0 110ms Adjustment
value
1
1
1
1
0
0
0
70 1-4 Pause time setup
(between dialing)
Used to set the pause time of every pause input in dialing. The set range is 0 - 15
by binary input of N into "1sec x N" (1sec - 15sec). When 0 is selected, it is set to
the default (2sec).
0 2sec Initial setup
0
1
0
5 Detection of line current
when dialing
Used to set whether dialing is made or not after detection of the line current when
connecting the line in automatic dialing.
When it is set to YES and the line current is not detected, dialing is not made.
1NO
6 Dial tone detection Used to set whether the dial tone is detected or not in automatic dialing.
When it is set to YES and the dial tone is not detected, dialing is not made.
1YES
7 Dial tone monitoring
time
Used to set the judgment time for detection of dial tone. 0 5sec
8 FAX calling CNG
detection
Used to set whether CNG from the other party is detected or not when FAX calling.
When it is set to YES and CNG is detected, the line is judged as busy.
0Not
detected
SW
No.
Bit
No.
Item Switch selection and function Initial value
Key
operator
Bit No. 1234 Bit No. 1234
2.0dB 0000-2.0dB 1000
2.5dB 0001-1.5dB 1001
3.0dB 0010-1.0dB 1010
3.5dB 0011-0.5dB 1011
4.0dB 01000dB 1100
4.5dB 01010.5dB 1101
5.0dB 01101.0dB 1110
5.5dB 01111.5dB 1111
Bit No. 7 8
Setup NO 0 0
2.5sec 0 1
3sec 1 0
Setup NO 1 1
1: NO 0: YES
1: YES 0: NO
1: 17sec 0: 5sec
1: CNG detection YES 0: CNG detection NO