Specifications

AR-FX5 SIMULATIONS, FAX SOFTWARE SWITCH 6-34
32 1-8 Not used 0
0
0
0
0
0
0
0
33 1-7 Not used 0
0
0
0
0
0
0
8 Paper selection when
reception printing
(LTR/A4)
Used to set whether LTR is confirmed first of all in selection of paper for reception
printing or paper that provides smaller reduction rate of A4 and LTR is selected.
0 Priority on
LTR/A4
34 1-7 Not used 0
0
0
0
0
0
1
8 Duplex reception print Used to set whether reception data are printed on duplex surfaces when printing
FAX reception.
0 Not print Receive
setup
35 1 Rotational print Used to set whether rotation print is made or not when received data can be
printed by rotating in FAX reception printing.
0 Rotational
print
2 Sub scan length
judgment
Used to set whether priority is given to the width or the length when selecting the
optimum paper in received data printing.
0 Priority on
data length
3,4 Received data print
condition setup
Used to set selection of the optimum paper for received data printing. 0 00 Receive
setup
0
5 Received document
output setup
Used to set whether all received data are collectively printed after completion of all
FAX reception or each page is printed after completion of reception of each page.
0 Collectively
outputted
6 Not used 0
7 Automatic reduction/
dispose setup
Used to set whether automatic reduction is made so that the received data can be
printed on a page if reduced, when a document the size of which exceeds the
printable limit but is within the magnification ratio setup range of automatic
reduction is received.
0 Reduction Receive
setup
8 Reduction/dispose
setup when printing A3,
11X 17
Used to set whether the main scan width data are reduced or data on both edges
are disposed without reduction when A3 width document is received and printed
on 11x 17 inch paper. When set to "Reduction," the data are reduced by 94%.
1 Dispose
SW
No.
Bit
No.
Item Switch selection and function Initial value
Key
operator
1: Priority on LTR 0: Priority on LTR/A4 reduction rate
1: Duplex reception is printed. 0: Duplex reception is not printed.
1: Received data are not rotated. 0: Received data are rotated.
1: Priority on data width 0: Priority on data length
Bit No. 3 4
Optimum size/Large size/reduction 0 0
Optimum size/Large size 0 1
Optimum size/Large size/Division 1 0
Optimum size/Large size/reduction 1 1
1: Each page is printed after reception
of each page.
0: Collectively printed after completion
of all FAX reception
1: Automatic reduction is not made and data
exceeding the printable limit are disposed
.
0: Printed by automatic reduction
1: Dispose 0: Reduction