Specifications

AR-FX5 SIMULATIONS, FAX SOFTWARE SWITCH 6-33
28 1-5 Output tray setup Used to specify the default output tray in the combination of each output system.
For the main body only or the main body + duplex without manual feed, output is
always made from the center tray.
1 1 Receive
setup
1
1
1
1
6-8 Not used 0
0
0
29 1-3 Reception separator
paper insertion tray
Used to set the tray to discharge the reception separator paper when the reception
separator paper setup is valid and a FAX reception document is printed.
When set to 110 or 111, tray 1 is selected.
0 Tray 1 Receive
setup
0
0
4 FAX separator YES/NO Used to set YES/NO of separator paper output when printing FAX reception data. 0 Not output Receive
setup
5-8 Not used 0
0
0
0
30 1 Not used 0
2 Error reception in RTN
reception
Used to set whether RTN signal reception is judged as an error or not. (Only in G3
mode)
0 Judges as
an error
3-8 Not used 0
0
0
0
0
0
31 1-8 Not used 0
0
0
0
0
0
0
0
SW
No.
Bit
No.
Item Switch selection and function Initial value
Key
operator
Bit
No
Machine + Manual duplex 1 1: Left tray 0: Center tray
Built-in finisher +
Duplex/Built-in finisher
2 1: Left tray 0: Finisher upper tray
Mail bin stacker +
Duplex/Mail bin stacker
3 1: Left tray 0: Mail bin upper tray
Machine +
Console finisher + Duplex
4 1: Finisher tray 0: Center tray
Mail bin stacker + Console finisher 5 1: Finisher tray 0: Mail bin upper tray
Bit No. 1 2 3
Tray 1 0 0 0
Tray 2 0 0 1
Tray 3 0 1 0
Tray 4 0 1 1
LCC 1 0 0
Multi manual feed 1 0 1
1: Separation paper is outputted. 0: Separation paper is not outputted.
1: RTN reception is not judged as an
error.
0: RTN reception is judged as an error.