Specifications

AR-FX5 SIMULATIONS, FAX SOFTWARE SWITCH 6-32
25 1,2 CED/ANSam send start
wait time
Used to set the wait time for sending CED/ANSam signals to the line from FAX
reception state after connection of the line.
0 2.25sec
0
3,4 CNG send time Used to set the wait time from connection of the line to sending of CNG signal to
the line.
1 2sec
1
5 CED detection time Used to set the wait time for determination of the signal when detecting CED/
ANSam signal.
0 500ms
6-8 Not used 0
0
0
26 1,2 Number of times of RCP
send
Used to set the number of times of RCP send when sending Phase C in ECM
system.
When the other party cannot detect the RCP frame, it becomes easy to detect
RCP.
03 times
0
3 Number of RTC EOL
send
Used to set how many EOL's are sent as RTC when sending Phase C.
When the other party cannot detect the RCP, it becomes easy to detect RCP.
06 times
4-8 Not used 0
0
0
0
0
27 1-4 Echo suppressor tone
setup
Used to set YES/NO of echo suppressor tone in each high-speed modulation
system.
0YES
(No for V.29
only)
0
1
0
5-8 Not used 0
1
1
1
SW
No.
Bit
No.
Item Switch selection and function Initial value
Key
operator
Bit No. 1 2
2.25sec 0 0
3sec 0 1
4sec 1 0
2.25sec 1 1
Bit No. 3 4
0.5sec 0 0
1sec 0 1
1.5sec 1 0
2.0sec 1 1
1: 1000ms 0: 500ms
Bit No. 1 2
3 times 0 0
6 times 0 1
9 times 1 0
12 times 1 1
1: 12 times 0: 6 times
Bit No
V.33 1 1: NO 0: YES
V.17 2 1: NO 0: YES
V.29 3 1: NO 0: YES
V.27 4 1: NO 0: YES