Specifications

AR-FX5 SIMULATIONS, FAX SOFTWARE SWITCH 6-29
15 1-4 Not used 0
0
0
0
5-8 Signal send level Used to set the signal send level from the modem. The set range is 0 - 15 in
increment of 1dBm by binary input. For an actual line, -(set value) - about 5dBm.
Since a different country (destination) has a different max. level, when the max.
level is set, it is the max. level in the current country code, except for North
America.
The max. Send level limit is : Australia : -9dBm Europe : -10dBm
0 About
10dBm
Adjustment
value
1
0
1
16 1-4 Modem transmission
speed (Except for V.34)
(DCS)
Used to set the first speed in transmission of other than V.34. Reflected on DSC.
Transmission is made not always at this speed.
For bit marked with , set to V.17 14400bps.
1 V.17-
14400bps
0
0
0
5,6 Reception modem
speed fixed
(other than V.34) (DIS)
Used to set the first speed in transmission of other than V.34.
Transmission is made not always at this speed.
0Not fixed
0
7,8 Not used 0
0
17 1-4 Not used 0
0
0
0
5 ECM (Valid for other
than V.34) (Reflected on
V.21 DIS/DCS.)
Used to set whether error resend mode is executed or not.
Valid only when communication is made in a mode other than V.34.
0 YES Initial setup
6 Not used 0
7,8 Coding capacity in send/
receive
(Reflected on DIS/DCS/
DTC)
Used to set coding capacity to transmit to the other party machine in a
communication of other than V.34.
0 JBIG/MMR/
MR/MH
0
18 1-8 Not used 0
1
0
0
0
0
0
1
SW
No.
Bit
No.
Item Switch selection and function Initial value
Key
operator
Bit No. 1 2 3 4 Bit No. 1 2 3 4
V.27ter 2400bps 0 0 0 0 V.17 14400bps 1 0 0 0
V.29 9600bps 0 0 0 1 V.17 9600bps 1 0 0 1
V.27ter 4800bps 0 0 1 0 V.17 12000bps 1 0 1 0
V.29 7200bps 0 0 1 1 V.17 7200bps 1 0 1 1
V.33 14400bps 0 1 0 0 1 1 0 0
0101 1101
V.33 12000bps 0 1 1 0 1 1 1 0
0111 1111
Bit No. 5 6
Fixing NO 0 0
V.29-9600bps 0 1
V.27ter-4800bps 1 0
V.17-14400bps 1 1
1: NO (ECM function NO) 0: YES (ECM function YES)
Bit No. 7 8
JBIG/MMR/MR/MH 0 0
MMR/MR/MH 0 1
MR/MH 1 0
MH 1 1