Specifications

AR-FX5 SIMULATIONS, FAX SOFTWARE SWITCH 6-25
4 1 Not used 0
2 Registration of sender's
telephone number
Used to set Enable/Disable of registration of sender's telephone number. 0 Enable
3 Polling protection Used to set Enable/Disable of confidential protection (inhibition of transmission to
erroneous party) in transmission of bulletin board. Confidential protection is made
by collating the number registered in this machine and that in the other party
machine. Sender's number and send request allow number are collated each
other. In this machine, Sharp's unique collating of system number ID
number is not performed.
0 Protect Polling
security
setup
4 Relay data output Used to set whether the document received from the relay station is outputted or
not when relay broadcast reception is made.Similar to F code relay broadcast
indicating reception.
0 Output
5 Not used 0
6 F code relay broadcast
function
Used to set whether relay broadcast transmission is made by receiving F code
relay broadcast instruction from the other party or F code relay broadcast
instruction is not received (even though the relay box number is in accord with).
Though this item is set to "without this function," F code relay broad cast instruction
can be transmitted.
0 Receive
7 F code confidential
reception
Used to set YES/NO of F code confidential reception from the other party (even
though the confidential box number is in accord by SUB). Though this item is set to
NO, F code confidential transmission can be made.
0 Receive
8 F code communication
error process
Used to set YES/NO of resend in F code transmission.
When, however, SW59-3 (Recall allow in communication error) is set to 0 (Inhibit),
recall is not made.
0 Not resend
5 1 F code password
transmission setup
when the other party
has no function of
password
Used when the other party machine has no function of F code password in F code
transmission.
0 Line
disconnecti
on with
DCN
2-5 Image quality in
reception
(Reflected on DIS, not
reflected on DTC)
Used to set reception image resolution in FAX reception ringing (DIS send).
Machine setup always allows reception in super fine mode.
(Therefore, the same operation with "1011.")
0 Machine
setup
0
0
0
6 SUB capacity in
reception
Used to set SUM capacity (Bit 49) to "1" in reception (DIS send). 0 YES
7 SEP capacity in
reception
Used to set SEP capacity (Bit 47) to "1" in reception (DIS send) 0 YES
8 Reception PWD/SID
capacity
Used to set PWD/SID capacity (Bit 50) to "1" in reception (DIS send). 0 YES
SW
No.
Bit
No.
Item Switch selection and function Initial value
Key
operator
1: Registration inhibited 0: Registration allowed
1: Not protected 0: Protected
1: Document received from
relay station is not outputted.
0: Document received from
relay station is outputted.
1: F code relay broadcast
instruction is received from
allowed party.
0: F code relay broadcast instruction is not
received even from allowed party.
(Judged as a communication error.)
1: F code confidential reception inhibited
(Judged as a communication error.)
0: F code confidential
reception allowed.
1: Resend 0: Not resend
1: Send with password 0: Disconnecting of line with DCN
Bit No. 2345
Machine setup
(including bit pattern which is not described)
0000
Standard 1 0 0 0
Fine + Standard 1 0 0 1
Super fine + Fine + Standard 1 0 1 0
Ultra fine+ Super fine + Fine + Standard 1 0 1 1
1: NO (Set to 0) 0: YES (Set to 1)
1: NO (Set to 0) 0: YES (Set to 1)
1: NO (Set to 0) 0: YES (Set to 1)