Specifications

AR-FX5 SIMULATIONS, FAX SOFTWARE SWITCH 6-20
(This mode is for development, and inhibited in the market.)
<List of set values>
(This mode is for production check, and inhibited in the market.)
<Display message>
66-28
Purpose Setup
Function (Content) Used to record a sound message.
Recording is available in 1 ~ 5, max. 6sec for
one. (Only when FAX is installed.)
Section FAX
Item Operation
Operation/Procedure 1) Record a sound message from the handset.
2) Press CUSTOM SETTING to interrupt
recording
66-29
Purpose Setup
Function (Content) Used to clear the telephone directory.
Section FAX
Item Operation
Operation/Procedure 1) Select with 10 digit key pad and press START
to execute the following.
1: Telephone directory clear
2: Telephone directory not clear
SIMULATION 66-28
VOICE RECORD. SELECT 1-5, AND PRESS START.
1. MESSAGE1 2. MESSAGE2 3. MESSAGE3
4. MESSAGE4 5. MESSAGE5
1
SIMULATION 66-29
ADDRESS DATA CLEAR.
ARE YOU SURE ?
1. YES
2. NO
1
66-30
Purpose Setup
Function (Content) Used to check TEL/LIU status change.
(Only when FAX is installed.)
Section FAX
Item Operation
Operation/Procedure The TEL/LIU status can be checked.
The display is highlighted when the status is
changed.
HS1 Polarity reverse signal
HS2 Polarity reverse signal
RHS Handset hook SW
EXHS External telephone hook SW
66-31
Purpose Setup
Function (Content) Used to set the TEL/LIU status.
(Only when FAX is installed.)
Section FAX
Item Operation
Operation/Procedure Entry of only 0 or 1 is effective.
Shift the cursor to the bit to enter.
Cursor shift keys : : * , : #.
The bits are 1, 2, 3, 4, 5, 6, 7, and 8 from the left.
The entered bit is highlighted.
Press STRT to select the relay.
66-32
Purpose Setup
Function (Content) Used to check the received data.
(Only when FAX is installed.)
Section FAX
Item Operation
Operation/Procedure The fixed data received from the line are
checked.
CHECKING Checking
OK Checking complete (Coincided)
NG Checking end (Not coincided)
SIMULATION 66-30
TEL/LIU SENSOR CHECK.
HS1 HS2 EXHS
1
RHS
10001100
SIMULATION 66-31
TEL/LIU SETTING.
INPUT O 1, AND PRESS START.
MOVEMENT LEFT: [*] RIGHT: [#]
1. 2.CION 3. MR 4. EC
5. 6. 7. DP 8.
1 2 3 4 5 6 7 8
MPXA
S.
CML
SIMULATION 66-32
RECEIVED DATA CHECK.
CHECKING...(OK or NG)