Specifications

AR-FX5 SIMULATIONS, FAX SOFTWARE SWITCH 6-15
<List of set values>
<List of set values>
66-11
Purpose Operation test, check
Function (Content) Used to check the output operation of FAX G3
mode 300BPS.
(Used to check the MODEM operation.)
Send level Max.
(Only when FAX is installed.)
Section FAX
Item Operation
Operation/Procedure A signal of 300bps is outputted. (Level Max.)
Enter a number during execution to change the
kind of signal.
Press START to start sending a voice message.
Press CUSTOMSETTING to terminate.
1 NO SIGNAL No signal
2 11111
3 11110
4 00000
5 010101
6 00001
SIMULATION 66-11
300bps SIGNAL OUTPUT.(LEVEL MAX) SELECT 1-6, AND PRESS
START.
1.NO SIGNAL 2.11111 3.11110 4.00000
5.010101 6.00001
1
SIMULATION 66-11
300bps SIGNAL OUTPUT.(LEVEL MAX) SELECT 1-6, AND PRESS
START.
EXECUTING...
1.NO SIGNAL 2.11111 3.11110 4.00000
5.010101 6.00001
1
SIMULATION 66-11
300bps SIGNAL OUTPUT.(LEVEL MAX) SELECT 1-6, AND PRESS
START.
EXECUTING...
1.NO SIGNAL 2.11111 3.11110 4.00000
5.010101 6.00001
3
SIMULATION 66-11
300bps SIGNAL OUTPUT.(LEVEL MAX) SELECT 1-6, AND PRESS
START.
1.NO SIGNAL 2.11111 3.11110 4.00000
5.010101 6.00001
3
Press [CUSTOM SETTING] key.
Press [CUSTOM SETTING] key.
Select 3 and press [START] key.
Select 1 and press [START] key.
Same
display
66-12
Purpose Setup
Function (Content) Used to check the output operation of FAX G3
mode 300BPS.
(Used to check the MODEM operation.)
Signals are sent in the send level set with the
soft switch. (Only when FAX is installed.)
Section FAX
Item Operation
Operation/Procedure A signal of 300bps is outputted.
(Send level is set with SW.)
Enter a number during execution to change the
kind of signal.
Press START to start sending a voice message.
Press CUSTOMSETTING to terminate.
1 NO SIGNAL No signal
2 11111
3 11110
4 00000
5 010101
6 00001
SIMULATION 66-12
300bps SIGNAL OUTPUT.(SOFT SW.) SELECT 1-6, AND PRESS
START.
1.NO SIGNAL 2.11111 3.11110 4.00000
5.010101 6.00001
1
SIMULATION 66-12
300bps SIGNAL OUTPUT.(SOFT SW.) SELECT 1-6, AND PRESS
START.
EXECUTING...
1.NO SIGNAL 2.11111 3.11110 4.00000
5.010101 6.00001
1
SIMULATION 66-12
300bps SIGNAL OUTPUT.(SOFT SW.) SELECT 1-6, AND PRESS
START.
EXECUTING...
1.NO SIGNAL 2.11111 3.11110 4.00000
5.010101 6.00001
2
SIMULATION 66-12
300bps SIGNAL OUTPUT.(SOFT SW.) SELECT 1-6, AND PRESS
START.
1.NO SIGNAL 2.11111 3.11110 4.00000
5.010101 6.00001
2
Press [CUSTOM SETTING] key.
Press [CUSTOM SETTING] key.
Select 3 and press [START] key.
Select 1 and press [START] key.
Same
display