Specifications

AR-FX5 SIMULATIONS, FAX SOFTWARE SWITCH 6-9
<List of set values>
* SIM 1 cannot be changed with this simulation.
Main code 61
61-3
Purpose Adjustment
Function (Content) Used to adjust the scanner (exposure) laser
power (absolute value) in the FAX reception
mode. (Only when FAX is installed.)
Section PCU
Item Operation
Operation/Procedure Set the laser power in FAX reception.
Enter the set value and press Start to store it.
Initial value Set range
1 FAX reception 45PPM 104 104 - 150
(45PPM)
80 - 150
(35PPM)
35PPM 80
SIMULATION 61-3
LASER POWER SETTING (FAX). PRESS START.
1. FAX
1
5
SIMULATION 61-3
LASER POWER SETTING (FAX). INPUT VALUE 1-165, AND PRESS START.
1. FAX
5
Press [START] key.
Press [CUSTOM SETTING] key
or [START] key.
Main code 66
66-1
Purpose Setup
Function (Content) Used to set the FAX soft switch function.
(Used to utilize the FAX soft switch function.)
Section FAX
Item
Operation/Procedure Set the Fax soft switch.
(For details of the soft SW, refer to the AR-FX5
Service Manual.)
Entry of 1 - 8 only is effective.
1) Specify the bit to be changed (highlighted)
with a number.
2) Press START to rewrite the setting.
1
SIMULATION 66-1
FAX SOFT SW. SETTING. INPUT DATA No(1-8), AND PRESS START.
SOFT SW-2:
00001001
SIMULATION 66-1
FAX SOFT SW. SELECT 2 - 80, AND PRESS START.
1 2 3 4 5 6 7 8
Press [START] key.
Press [CUSTOM SETTING] key
or [START] key.