Specifications

AR-FX5 SIMULATIONS, FAX SOFTWARE SWITCH 6-2
66 10 Used to clear all data of image memory
(memory send, receive). Confidential data are also cleared.
(Only when FAX is installed.)
User data output, check
(display, print)
FAX Data
11 Used to check the output operation of FAX G3 mode 300BPS.
(Used to check the MODEM operation.)
Send level 0dB (Max.) (Only when FAX is installed.)
Operation test, check FAX Operation
12 Used to check the output operation of FAX G3 mode 300BPS.
(Used to check the MODEM operation.) Signals are sent in the
send level set with the soft switch. (Only when FAX is installed.)
Operation test, check FAX Operation
13 Used to enter (set) the number for the FAX dial signal output
test.
(The dial number signal set with this simulation is outputted in
the dial signal output test with SIM 66-14~16)
(Only when FAX is installed.)
Setup FAX Data
14 Used to set the make time in the FAX pulse dial mode (10PPS)
and to test the dial signal output.
(The dial number signal set with SIM 66-13 is outputted.)
Used to check dialing troubles and the operation.
(Only when FAX is installed.)
Setup FAX Operation
15 Used to set the make time in the FAX pulse dial mode (20PPS)
and to test the dial signal output. (The dial number signal set
with SIM 66-13 is outputted.) Used to check dialing troubles
and the operation. (Only when FAX is installed.)
Setup FAX Operation
16 Used to test the dial signal (DTMF) output in the FAX tone dial
mode. (The dial number signal set with SIM 66-13 is outputted.)
The send level can be set to an optional level.
Dialing troubles and operation.(Only when FAX is installed.)
Setup FAX Operation
17 Used to test the dial signal (DTMF) output in the Fax tone dial
mode. Send level Max. Used to check the operation. (Only
when FAX is installed.)
Setup FAX Operation
18 Used to test the dial signal (DTMF) in the FAX tone dial mode.
The send level set with the soft switch is outputted. Used to
check the operation. (Only when FAX is installed.)
Setup FAX Operation
19 Used to backup the FAX SRAM data into the flash
Memory(Option FAX memory:AR-MM9)
(Only when FAX is installed.)
Setup FAX Operation
20 Used to restore the backup data (SIM 66-19) to SRAM.
(Only when FAX is installed.)
Setup FAX Operation
21 Used to print the FAX information (registrations, communication
management, file management, system errors).
(Only when FAX is installed.)
Adjustment, setup,
operation data output,
check (display, print)
FAX Data
22 Used to adjust the handset sound volume.
(Only when FAX is installed.)
Setup FAX Operation
23 Used to download the FAX program.
(Only when FAX is installed.)
Inhibited FAX
24 Used clear the FAST memory data.
(Only when FAX is installed.)
Inhibited FAX
25 Used to register the FAX number for MODEM dial-in.
(Only when FAX is installed.)
Inhibited FAX
26 Used to register the external telephone number for MODEM
dial-in. (Only when FAX is installed.)
Inhibited FAX
27 Used to register the voice-warp transfer number.
(Only when FAX is installed.)
Inhibited FAX
28 Used to record a sound message. (Only when FAX is installed.) Inhibited FAX
29 Used to clear the telephone directory.
(Only when FAX is installed.)
Setup FAX Operation
30 Used to check TEL/LIU status change. Setup FAX Operation
31 Used to set the TEL/LIU status. Setup FAX Operation
32 Used to check received data. Inhibited FAX
33 Used to check signal detection. Inhibited FAX
34 Used to measure and display the communication time. Setup FAX Operation
35 Modem program rewriting.(Only when FAX is installed.) Operation test, check FAX Operation
36 Used to check interface between MFPC and MDMC.
Check is made in the data line or the command line.
Operation test, check FAX Operation
Code
Function (Content) Purpose Section Item
Main Sub