Specifications

AR-FX5 SIMULATIONS, FAX SOFTWARE SWITCH 6-1
[6] SIMULATIONS, FAX SOFTWARE SWITCH
1. Entering the simulation mode
a. Nomal mode
Enter the copy mode and perform the following procedures.
[P] [*] [C] [*] [Main code] [START] [Sub code]
[START]
b. FAX mode
Enter the copy mode and perform the following procedures.
[9] [*] [8] [#] [7]
2. Switching the simulation mode
Press [USER SETTING] to return to the code entry screen.
3. Canceling the simulation mode
Press CA key to cancel the simulation mode.
4. Simulation list
Code
Function (Content) Purpose Section Item
Main Sub
22 5 Used to check the ROM version of each unit (section). Other Software
6 Used to print the list of adjustments and setup data
(simulations, FAX soft switches, counters).
Adjustment, setup,
operation data output,
check (print)
Data Setup,
adjustment
data
11 Used to check the use frequency of FAX. (send/receive)
(Only when FAX is installed.)
Adjustment, setup,
operation data output,
check (display)
FAX Data
24 10 Used to clear the FAX counter. (After completion of
maintenance, this counter must be cleared.)
(Only when FAX is installed.)
Data clear FAX Counter
46 12 Used to adjust the print density in the FAX mode (all modes).
An adjustment with this simulation affects all the copy density
adjustment values. (Only when FAX is installed)
Adjustment Picture
quality
13 Used to adjust the print density in the FAX mode
(Standard mode). (Only when FAX is installed.)
Adjustment Picture
quality
14 Used to adjust the print density in the FAX mode
(Fine mode). (Only when FAX is installed.)
Adjustment Picture
quality
15 Used to adjust the print density in the FAX mode
(Super Fine mode). (Only when FAX is installed.)
Adjustment Picture
quality
16 Used to adjust the print density in the FAX mode
(Ultra Fine mode). (Only when FAX is installed.)
Adjustment Picture
quality
61 3 Used to adjust laser power
(absolute value) in the FAX reception mode.
(Only when FAX is installed.)
Adjustment Operation
66 1 Used to set the FAX soft switch function. (Used to utilize the
FAX soft switch function.)
Setup FAX
2 Used to set the FAX soft switch setup to the default.
(Except for the adjustment values)
Data clear FAX Data
3 Used to check the operations of FAX PWB memory
(read/write). (This adjustment is required when replacing the
PWB with a new one.)
Operation test, check FAX Data
4 Used to check the operations of data signal output in the FAX
data output mode.
(Used to check the MODEM operation.)
Send level Max. (Only when FAX is installed.)
Operation test, check FAX Operation
5 Used to check the operations of data signal output in the FAX
data output mode.
(Used to check the MODEM operation.)Signals are sent in the
send level set with the soft switch. (Only when FAX is installed.)
Operation test, check FAX Operation
6 Used to print the confidential password.
(Used when the confidential password is forgotten.)
(Only when FAX is installed.)
User data output, check
(display, print)
FAX Data
7 Used to print the image memory data (memory send, receive).
(Only when FAX is installed.)
User data output, check
(display, print)
FAX Data
8 Used to check the output operation of the FAX sound signals.
(Sound output IC operation check) Send level Max.
(Only when FAX is installed.)
Operation test, check FAX Operation
9 Used to check the output operation of the FAX sound signals.
(Sound output IC operation check)
(Only when FAX is installed.)
Operation test, check FAX Operation