User Manual
STORING, EDITING, AND CLEARING AUTO DIAL KEYS AND NUMBERS
53
Storing, Editing, and Clearing Auto Dial Keys and Numbers
2
3
Enter the passcode (up to 20 digits) with the numeric keys and then
press the OK key.
●
Characters that can be entered are numbers, #, , and spaces. However, the initial
character cannot be a space.
●
If desired, you can omit the passcode.
●
If you make a mistake, press the CLEAR key and then re-enter the correct number.
Note
●
When you press the OK key, you return to the option setting screen and a checkmark appears
to the left of "SUB ADDRESS".
Selecting Chain dialing
1
Perform the initial step for selecting an option setting (See step 1 on
the previous page), select "CHAIN DIAL" with the or key, and
then press the OK key.
●
A checkmark ( ) appears beside settings that are enabled.
2
Select "ON" with the or key and then press the OK key.
●
If you do not wish to select Chain Dialing, select "OFF" and then press the OK key.
Note
●
When you select "ON" and then press the OK key, you return to the option setting screen and
a checkmark appears to the left of "CHAIN DIAL".
DQQMࡍࠫ㧞㧜㧜㧝ᐕ㧣㧝㧣ᣣޓἫᦐᣣޓඦᓟ㧢ᤨ㧡㧢ಽ