User Manual

USING KEY OPERATOR PROGRAMS
168
Using Key Operator Programs
3
Press the or key to select "SET S.A.MEM POLL" and then press
the OK key.
4
Press the or key to select "NEW REGISTRATION" and then press the OK key.
5
Press the or key to highlight the unused sub-address memory
polling box that you wish to program, and then press the OK key.
6
Enter a name for the box (up to 36 characters) and then press the OK key.
●
To enter characters, see "ENTERING CHARACTERS" on page 63.
7
Program a sub-address and passcode. (See steps 2 and 3 pages 52, 53)
●
Numbers from 0 to 9 can be entered for the sub-address. Numbers from 0 to 9, as well as
"#" and " ", can be entered for the passcode.
●
If you make a mistake, press the CLEAR key and then re-enter the correct number.
Note
●
To clear a sub-address memory polling box, follow these steps:
(1) Select "DELETE" in step 4 and then press the OK key.
(2) Press the or key to select the name of the sub-address memory polling box that you
wish to clear, and then press the OK key.
(3) Press the or key to select "DELETE" and then press the OK key.
DQQMࡍ࡯ࠫ㧞㧜㧜㧝ᐕ㧣᦬㧝㧣ᣣޓἫᦐᣣޓඦᓟ㧢ᤨ㧡㧢ಽ