User Manual

140
Key Operator Program List
KEY OPERATOR PROGRAM LIST
The following list shows the key operator programs for the fax function.
Setting Program name Program function (description) Page
LIST PRINT/SET LIST PRINT This prints the Key Operator List, Confidential Code List,
Junk Fax Number List, Sub-address Setting List, ACC.# List,
and ACC. Usage List.
144
PRINT SELECTION These settings are used to select the condition for printing a
Transaction Report after a transaction is completed to inform
you of the result (completed normally, line error, etc.).
Conditions can be separately set for several types of
communication (regular transmission, broadcast transmission,
confidential reception).
145
IMAGE MEM.PRINT
(LINE ERROR)
This setting is used to have a portion of the original document
printed on a Transaction Report when a line error prevents the
transmission.
145
AUTO LISTING This setting is used to have an activity report showing the
machine's most recent transactions printed out automatically at
a selected time.
146
INITIAL
SETTING
DIAL MODE This setting is used to set the appropriate dial mode (tone or
pulse) for the line connected to the machine.
146
PAUSE TIME This setting is used to set the duration of each pause entered
between digits of a fax number.
147
OWN PASSCODE
SET
This setting is used to program the name of the user of the
machine and the fax number.
147
SPEAKER VOLUME This setting is used to adjust the on-hook volume, the ringing
volume, and the line monitor volume.
148
EXTENSION TEL Enable this setting when you have connected an extension
phone to the machine.
148
DISTINCTIVE RING This setting is used when you have multiple phone/fax numbers
assigned to one line and you wish to use a different ringing
pattern for each number.
149
REMOTE
RECEPTION
This setting is used to change the number for activating fax
reception from an extension phone.
149
ACCOUNT
CONTROL
This setting is used to turn on Department Code mode. 150
ACCOUNT # SET This setting is used to program department codes and
department names for Department Code mode.
150
DATE & TIME SET This setting is used to set the machine's internal clock to the
current date and time.
151
DAYLIGHT SAVING
TIME SETTING
Select this setting to have the clock automatically move forward
and backward at the beginning and end of Daylight Saving
Time.
152
SENDING
FUNCTION
RES. CON. SET This setting is used to select the default resolution and contrast
settings for Fax mode.
152
AUTO REDUCE TX This setting is used to select whether a transmitted original
image is reduced to fit the size of the paper in the receiving
machine.
153
ROTATE TX This setting is used to have an original that is loaded vertically
rotated to a horizontal orientation (or vice-versa) when
transmitted.
153
DQQMࡍ࡯ࠫ㧞㧜㧜㧝ᐕ㧣᦬㧝㧣ᣣޓἫᦐᣣޓඦᓟ㧢ᤨ㧡㧢ಽ