User Manual

EXTENSION PHONE CONNECTION
113
Extension Phone Connection
4
Activating fax transmission
Place the original on the platen glass or in the SPF, adjust the original size, resolution, and exposure
settings as needed, and then follow the steps below.
1
Lift the extension phone and call the receiving party.
2
Press the START key.
3
Select "TX" with the or key and then press the OK key.
4
Replace the phone.
Activating fax reception
You can activate fax reception after answering a call on the extension phone by entering a remote code
(a 1-digit number followed by ). This is called "remote reception". Fax reception can be activated
after speaking on the phone or when you hear a fax tone through the phone.
●
This function cannot be used if you are on a pulse dial line and cannot issue tone signals from your
phone. Refer to your phone manual to see if your phone can issue tone signals.
●
This function cannot be used when you use the extension phone to place a call. (The function is used
to activate fax reception only when you answer an incoming call on the phone.)
1
Set the extension phone to issue tone signals.
●
Refer to your phone manual to issue tone signals.
●
If your phone already issues tone signals, proceed from step 2.
2
Enter "5", " ", and " " using the keypad of the extension phone.
●
A "ding-dong" sound is heard and fax reception is activated.
3
Replace the phone.
Note
●
The number (5) for activating fax transmission and reception is called the remote number. This
number can be changed to any number from 0 to 9 with the key operator program. (See page
149)
DQQMࡍ࡯ࠫ㧞㧜㧜㧝ᐕ㧣᦬㧝㧣ᣣޓἫᦐᣣޓඦᓟ㧢ᤨ㧡㧢ಽ