Service manual

AR-235/275 SIMULATION - 32
Setup of various copy conditions: Similar to the normal copy mode.
Use of [SPECIAL FUNCTION] key, [JOB STATUS] key, and [INTER-
RUPT] key is inhibited.
Operation/procedure
Adjust and set FAX document read lead edge position, read and print
the document.
Note: Executable only when the FAX is installed.
Operation/procedure
After the adjustment/setting of FAX print lead edge position, read and
print the document.
Note: Executable only when the FAX is installed.
Operation/procedure (Pattern 5)
Select the mode with the arrow keys, enter the adjustment value with
the 10-key, and press the [OK] key.
When the [START] key is pressed, a print is made and the display
returns to the mode selection menu.
Setup of various copy conditions: Similar to the normal copy mode.
Use of [SPECIAL FUNCTION] key, [JOB STATUS] key, and [INTER-
RUPT] key is inhibited.
Operation/procedure (Pattern 5)
Select the mode with the arrow keys, enter the adjustment value with
the 10-key, and press the [OK] key.
When the [START] key is pressed, a print is made and the display
returns to the mode selection menu.
(Initial screen) (Input screen) (Executing screen)
Display items Content
Setting
range
Default
1:SIDE1
Surface original scan start
position adjustment value
1-99 50
2:SIDE2
Back original scan start
position set value
1-99 50
3:END EDGE
Rear edge void
adjustment value (SPF)
1-99 50
4:LOSS(SIDE1)
Surface image loss
quantity set value
1-5 3
5:LOSS(SIDE2)
Back image loss quantity
set value
1-5 3
6:REARLOS(SIDE1)
Surface rear edge image
loss quantity set value
1-5 3
7:REARLOS(SIDE2)
Back rear edge image
loss quantity set value
1-5 3
50-8
The adjustments on the machine side must have been normally
completed.
Purpose
Adjustment
Function
(Purpose)
FAX lead edge adjustment (read)
Related soft SW
SW44-5 to 8, SW45-5 to 8
Adjustment position Adjustment range
Adjustment
unit
A OC read lead edge position 43 – 50 – 57 lines 8 lines
B OC read left edge position 43 – 50 – 57 lines 8 dots
C OC read rear edge position 43 – 50 – 57 lines 8 lines
D OC read right edge position 43 – 50 – 57 lines 8 dots
E SPF read lead edge position 43 – 50 – 57 lines 8 lines
F SPF read left edge position 43 – 50 – 57 lines 8 dots
G SPF read rear edge position 43 – 50 – 57 lines 8 lines
H SPF read right edge position 43 – 50 – 57 lines 8 dots
Sim50-6 SPF EDGE
1:SIDE1 50
2:SIDE2 50
3:DEN-B 50
1/4 50
OC read
SPF read
Read area
Read area
A
B
E
F
D
C
H
G
50-9
Purpose
Adjustment
Function
(Purpose)
FAX lead edge adjustment (print)
Related soft SW
SW74-1 to 4, SW75-5 to 8
Adjustment position Adjustment range
Adjustment
unit
A Lead edge position 43 – 50 – 57 16 lines
B Left edge position 43 – 50 – 57 16 dots
50-10
Purpose
Adjustment
Function
(Purpose)
Used to adjust the print image center position.
(Adjustment can be made for each paper feed
section.)
Section
Image processing (ICU)
Item
Picture quality Image position
(Initial screen) (Input screen) (Executing screen)
Display items Content Setting range Default
1:BYPASS
Manual feed 1-99 50
2:TRAY1
1st cassette
3:TRAY2
2nd cassette
4:TRAY3
3rd cassette
5:TRAY4
4th cassette
6:DUPLEX
Back print
50-12
Purpose
Adjustment
Function
(Purpose)
Used to adjust the print image center position.
(Adjustment can be made for each document mode.)
Section
Image processing
Item
Picture quality Image position
(Initial screen) (Input screen) (Executing screen)
Sim50-10 PRT.CENTER
1:BYPASS 50
2:TRAY1 50
3:TRAY2 50
1/2 50
Sim50-12 ORG.CENTER
1:OC 50
2:SPF(SIDE1) 50
3:SPF(SIDE2) 50
50