Service manual

AR-235/275 SIMULATION - 11
(
∗
) Linked with the destinations of SIM 26-6.
Linked with the auto exposure mode of SIM 46-19-1.
The minimum increment is 2V.
The result of (Set value – 199) / 2 is stored in the EEPROM.
When reading a value from the EEPROM, the value of (EEP value *2)
+ 200 is used as the set value.
Therefore, the set value entered must be an even number. If an odd
number is entered the entered odd number + 1 is displayed after
pressing [OK] key.
Operation/procedure (Pattern 4)
After selecting the mode, enter the adjustment value and press the
[OK] key, and output will be made for 30sec.
The input value is in the increment of –25V.
(
∗
) Linked with the destinations of SIM 26-6.
Linked with the auto exposure mode of SIM 46-19-1.
*1. The negative value of the set value corresponds to the grid high
output voltage.
*2. The set values can be selected from the above 8 patterns only.
*3. The selected pattern determines the grid high voltage and the grid
low voltage.
If, for example, the grid high voltage is set to –480V (pattern 1), the
grid low voltage is –350V.
Operation/procedure (Pattern 4)
After selecting the mode, enter the adjustment value and press the
[OK] key, and output will be made for 30sec.
The input value is in the increment of –25V.
(
∗
) Linked with the destinations of SIM 26-6.
Linked with the auto exposure mode of SIM 46-19-1.
*1. The negative value of the set value corresponds to the grid high
output voltage.
*2. The set values can be selected from the above 8 patterns only.
*3. The selected pattern determines the grid high voltage and the grid
low voltage.
If, for example, the grid high voltage is set to –480V (pattern 1), the
grid low voltage is –350V.
Operation/procedure (Pattern 4)
After selecting the mode, enter the adjustment value and press the
[OK] key, and output will be made for 30sec.
Display items Content
Installation
range
Default
1:AE
AE (
∗
) 200-550 426 (–426V)
2:TEXT
Character 450 (–450V)
3:TEXT/PHOTO
Character/Photo 450 (–450V)
4:PHOTO
Photo 450 (–450V)
5:SUPER PHOTO
Super photo 400 (–400V)
6:TONER SAVE
Toner save 376 (–376V)
8-2
Purpose
Adjustment/Operation test/check
Function
(Purpose)
Used to check and adjust the operation of the main
charger grid voltage (high mode) in each copy mode
and the control circuit.
Section
Image process (Photoconductor/Developping/Transfer/
Cleaning)
Photo conductor
(Initial screen) (Input/Selection screen) (Executing screen)
Display items Content
Setting
range
Default
1:AE
AE (
∗
) 1-8 4 (–555V)
2:TEXT
Character 5 (–580V)
3:TEXT/PHOTO
Character/Photo 5 (–580V)
4:PHOTO
Photo 5 (–580V)
5:SUPER PHOTO
Super photo 3 (–530V)
6:TONER SAVE
Toner save 2 (–505V)
NO. Set value Grid High Grid Low
1 480 –480V –350V
2 505 –505V –375V
3 530 –530V –400V
4 555 –555V –425V
5 580 –580V –450V
6 605 –605V –475V
7 630 –630V –500V
8 655 –655V –525V
Sim8-2 MHV(H) COPY
1:AE 3
2:TEXT 5
3:TEXT/PHOTO 5
1/2
Sim8-2 MHV(H) COPY
5:SUPER PHOTO 3
EXEC [ 1- 8] 3
Sim8-2 MHV(H) COPY
5:SUPER PHOTO 3
EXEC [ 1- 8] 3
8-3
Purpose
Adjustment/Operation test/check
Function
(Purpose)
Used to check and adjust the operation of the main
charger grid voltage (low mode) in each copy mode
and the control circuit.
Section
Image process (Photoconductor/Developping/Transfer/
Cleaning)
Photo conductor
(Initial screen) (Input/Selection screen) (Executing screen)
Display items Content
Setting
range
Default
1:AE
AE (
∗
) 1-8 4 (–425V)
2:TEXT
Character 5 (–450V)
3:TEXT/PHOTO
Character/Photo 5 (–450V)
4:PHOTO
Photo 5 (–450V)
5:SUPER PHOTO
Super photo 3 (–400V)
6:TONER SAVE
Toner save 2 (–375V)
NO. Set value Grid High Grid Low
1 480 –480V –350V
2 505 –505V –375V
3 530 –530V –400V
4 555 –555V –425V
5 580 –580V –450V
6 605 –605V –475V
7 630 –630V –500V
8 655 –655V –525V
8-10
Purpose Adjustment/Operation test/check
Function
(Purpose)
Used to check and adjust the operation of the
developing bias voltage in each printer mode and the
control circuit.
Section Image process (Photoconductor/Developping/
Transfer/Cleaning)
Developer/Toner hopper
(Initial screen) (Input/Selection screen) (Executing screen)
Sim8-3 MHV(L) COPY
1:AE 3
2:TEXT 5
3:TEXT/PHOTO 5
1/2
Sim8-3 MHV(L) COPY
5:SUPER PHOTO 3
EXEC [ 1- 8] 3
Sim8-3 MHV(L) COPY
5:SUPER PHOTO 3
EXEC [ 1- 8] 3
Sim8-10 DV BIAS PRT
1:DENS1(600) 400
2:DENS2(600) 450
3:DENS3(600) 450
1/4
Sim8-10 DV BIAS PRT
5:DENS5(600) 500
EXEC [200-550] 500
Sim8-10 DV BIAS PRT
5:DENS5(600) 500
EXEC [200-550] 500