Specifications

AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-36
31 1-4 ID (No.) setting 2
(2nd digit: When dial
inputting or dialing)
Used to set the ID No. when the PBX function is enabled. This setting is valid
when "ID" is set in SW59-7-8.If the set value is outside the specified range, it is
not used as an ID No.
0 Not used Initial set up
0
0
0
5-8 ID (No.) setting 3
(3rd digit: When dial
inputting or dialing)
Used to set the ID No. when the PBX function is enabled. This setting is valid
when "ID" is set in SW59-7-8.If the set value is outside the specified range, it is
not used as an ID No.
0 Not used Initial set up
0
0
0
32 1-8 Not used 0
0
0
0
0
0
0
0
33 1,2 Transmission cable
amplitude equalizer
Used to set whether the send level is changed by frequency or not when
sending FAX signal.
0 0dB
0
3-7 Not used 0
0
0
0
0
8 Paper selection when
reception printing
(LTR/A4)
Used to set whether LTR is confirmed first of all in selection of paper for
reception printing or paper that provides smaller reduction rate of A4 and LTR is
selected.
0 Priority on
LT R /A 4
34 1-7 Not used 0
0
0
0
0
0
0
8 Duplex reception print Used to set whether reception data are printed on duplex surfaces when
printing FAX reception.
0 Not print Receive
setup
35 1 Rotational print Used to set whether rotation print is made or not when received data can be
printed by rotating in FAX reception printing.
0 Rotational
print
2 Sub scan length
judgment
Used to set whether priority is given to the width or the length when selecting
the optimum paper in received data printing.
0 Priority on
data length
3,4 Received data print
condition setup
Used to set selection of the optimum paper for received data printing. 0 00 Receive
setup
0
SW
No.
Bit
No.
Item Switch selection and function USA Initial value Key
operator
Bit No. 1 2
0dB 0 0
4dB 0 1
8dB 1 0
12dB 1 1
1: Priority on LTR 0: Priority on LTR/A4 reduction rate
1: Duplex reception is
printed.
0: Duplex reception is not
printed.
1: Received data are not
rotated.
0: Received data are
rotated.
1: Priority on data width 0: Priority on data length
Bit No. 3 4
Optimum size/Large size/reduction 0 0
Optimum size/Large size 0 1
Optimum size/Large size/Division 1 0
Optimum size/Large size/reduction 1 1
[06]SIMULATIONS ･ FAXSOFTWARESWITCH.fm 36 ページ ２００４年１０月２６日 火曜日 午後３時４４分