Specifications

AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-3
66 21 Used to print the FAX information (registrations, communication
management, file management, system errors, protocol).
(Only when FAX is installed.)
Adjustment, setup,
operation data output,
check (display, print)
FAX Data
23 Used to download the FAX program.
(Only when FAX is installed.)
Inhibited FAX
24 Used clear the FAST memory data.
(Only when FAX is installed.)
Inhibited FAX
25 Used to register the FAX number for MODEM dial-in.
(Only when FAX is installed.)
Inhibited FAX
26 Used to register the external telephone number for MODEM
dial-in. (Only when FAX is installed.)
Inhibited FAX
27 Used to register the voice-warp transfer number.
(Only when FAX is installed.)(Voice-warp:Japan only)
Inhibited FAX
29 Used to clear the Address data. Setup FAX Operation
30 Used to check TEL/LIU status change. Setup FAX Operation
31 Used to set the TEL/LIU status. Setup FAX Operation
32 Used to check received data. Inhibited FAX
33 Used to check signal detection. Inhibited FAX
34 Used to measure and display the communication time. Setup FAX Operation
35 Modem program rewriting.(Only when FAX is installed.) Operation test, check FAX Operation
36 Used to check I/F between MFPC and MDMC.
Check is made in the data line or the command line.
Operation test, check FAX Operation
39 Registration of FAX destination FAX
42 Used to rewrite the program to the PIC installed in the FAX box.
To execute this simulation, FAX program writing must be
allowed. (Jumper and DIP switch which differ depending on the
model)
FAX
43 To execute this simulation, FAX program writing must be
allowed. (Jumper and DIP switch which differ depending on the
model)The adjustment value of PIC are changed and written.
The current setting is highlighted beside the item.
FAX
Code Function (Content) Purpose Section Item
Main Sub
[06]SIMULATIONS ･ FAXSOFTWARESWITCH.fm 3 ページ ２００４年１０月２６日 火曜日 午後３時４４分