Specifications

AR-FX11 TROUBLE CODE LIST 8-1
[8] TROUBLE CODE LIST
1. FAX-related service call error
2. Communication report codes
MAIN SUB Conditions
F6 00 FAX board
communic
ation
trouble
When sending cannot be made due to buffer
over.
10 FAX hard
error
When one of the following items is detected.
Page Memory Error/ FAX Board Error/ ROM
Error/ RAM Error/ Flash ROM Error.
80 FAX break
error
When an error is detected in the IO ASIC
serial controller.
81 FAX parity
error
82 FAX
overrun
error
84 FAX
framing
error
88 FAX
interface
error
There is no response of data from the
machine for 30 sec or more.
99 FAX
language
error
When the TEL/LIU PWB for EX Japan is
operated under the setting for Japan.
When the TEL/LIU PWB for Japan is
operated under the setting for EX Japan.
U1 03 FAX
battery
error
When the battery voltage on the FAX PWB
falls.
MAIN SUB Conditions
F6 00 FAX board
communic
ation
trouble
When sending cannot be made due to buffer
over.
10 FAX hard
error
When either of Bit3 - Bit7 is set.
80 FAX break
error
When an error is detected in the IO ASIC
serial controller.
81 FAX parity
error
82 FAX
overrun
error
84 FAX
framing
error
88 FAX
interface
error.
FAX
command
time out
error.
When SSH Bit2 (Interface Error) is set.
When there is no response of the command
which has response for 30 sec or more.
R_REL_REQ->R_REL_REQ_ACK
R_ENABLE->R_ENABLE_ACK
R_RSV_CAN->R_RSV_CAN_ACK
STARTING_REQ->STARTING_ACK
DOWNLD_REQ->DOWNLD_ACK
F_CINFO->F_CINFO
INF_AUDIT_CODE->INF_AUDIT_CODE
CHECK_AUDIT_CODE-
>CHECK_AUDIT_CODE
HAND_REC_REQ->HAND_REC_ACK
GET_TIME->SEND_TIME
S_SIM_REQ->S_SIM_ACK
CFG_START->CFG_START_ACK
F_P_COMPLETE->F_P_COMPLETE_ACK
F_SEJCT->F_SEJCT_ACK
LANGU_INFO->LANGU_INFO
WEBPAGE->WEBPAGE
99 FAX
language
error
In the response LANGU_INFO for SETUP,
the parameter is sent back as 0xfe.
U1 03 FAX
battery
error
When SSH Bit0 (Battery Error) is set.
[08]TROUBLE CODE.fm 1 ページ ２００４年１１月１２日 金曜日 午後２時２５分