Specifications

AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-54
U.S.A.: U.S.A. CA: Canada U.K: U.Kingdom GR: German FR: France
134 1 Summer time Used to set whether the summer time is automatically set
or not.
00111Follow the
destination.
YES
2 Receive rejection
record
Used to set whether the rejected record is remained on
the communication report or not when receive is rejected
by the receive rejection function.
00000Recorded
3,4 Time until resetting
when G3 DIS
cannot be received
in V.8 phase.
When send is made via a satellite, if the DIS signal is not
acknowledged, the receive level is adjusted again and
receive is tried again. This setting is used to set the time
until resetting.
0000010s
11111
5 Report table output
when in receive
rejection
Used to set whether the communication report is
outputted or not when receive is rejected with the receive
rejection function. ”Output” is enabled only when SW134-
2 is set to “0”.
00000Not output
6 Sheet count
method in case of
an error
Used to set whether an error page is included in the send
quantity count in FAX send or not. The default is: an error
page is not counted.
00000Send error
pages are
not included.
7 Not used 00000
8 YES/NO of quick
memory send
setting
Used to set whether the quick memory send ON/OFF is
displayed on the menu or not.
11111Setting is
displayed.
135 1-4 Scanner resource
securing time out in
direct send
Used to set the time out of the scanner warm-up time in
direct send.
Binary input
20 - 50 sec
0000026sec
00000
11111
11111
5 Energy-saving
reset with an
external TEL
Used to set whether the machine is reset from the
energy-saving mode or not when the hand set of the
external telephone is lifted in the energy-saving mode.
The default is: Not reset in Japan only.
11111Reset
(Complete
reset)
6 Not used 00000
7 External auditor
check
Used to set whether Enable/Disable of the FAX
department management when an external auditor is
used. The default is Disable.
00000Check
8 Not used 00000
136 1 RTC error
adjustment
Used to correct advancement of the clock. The default is
No Correction.
00000No error
adjustment
SW
No.
Bit
No.
Item Switch serection and function U.S.A. CA U.K GR FR Initial value Key operator
1 Enable 0 Disable
1 Not recorded 0 Recorded
Bit No. 3 4
8s 0 0
10s 0 1
12s 1 0
14s 1 1
1 Output 0 Not output
1 Send error pages are
included.
0 Send error pages are
not included.
1 Setting is displayed. 0 Setting is not
displayed.
1 Reset (Complete
reset)
0 Not reset (Only 24V
is reset.)
1 Not check 0 Check
1 Error adjustment 0 No error adjustment
[06]SIMULATIONS ･ FAXSOFTWARESWITCH.fm 54 ページ ２００４年１１月１２日 金曜日 午後２時２４分