Specifications

AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-42
U.S.A.: U.S.A. CA: Canada U.K: U.Kingdom GR: German FR: France
70 4,5 DIS receive
process selection
in receive
00000Judged as
an echo has
been
received,
and the
command is
resent.
00000
6 Enable/Disable
after DIS 41Bit
00000Enable
7 Interval time
between DCS and
TCF
1111175ms
8 TCF check time Check judgment is severer for 1.3sec. 111111.0sec
71 1-3 Not used 00000
00000
00000
4 Telephone line time Fixed to Enable for USA and Canada. 00111Follow the
destination.
5 Not used 00000
6-8 Dial-in wait time Binary input
Setting range 0 - 7 (1000ms - 2400ms)
000001400ms
11111
00000
72 1,2 RCP send number 000003times
00000
3-6 Flag detection byte
number
Binary input
Setting range 0 - 15
000004
11111
00000
00000
7EYE-Q check 00000O receive
and EYE-Q
check
8 Operation in ERR
frame receive
00000Not continue
the process
(Error).
73 1 Error process in
RTN receive
00000Error
SW
No.
Bit
No.
Item Switch serection and function U.S.A. CA U.K GR FR Initial value Key operator
Bit No. 4 5
Judged as an echo has been received, and
the command is resent.
00
The line is disconnected as an improper DIS. 01
When DIS is a receiver and there is a polled
document, polled send is made. For the
other cases, a judgment is made as an
echo has been received, and the command
is resent.
10
When DIS is a receiver and there is a polled
document, polled send is made. When DIS
is a transmitter, a judgment is made as an
echo has been received, and the command
is resent.For the other cases, a judgment is
made as an improper DIS, and the times
line is disconnected.
11
1 Disable 0 Enable
1 75ms 0 150ms
1 1.0sec 0 13.sec
1 Disable 0 Enable
Bit No. 1 2
3times 0 0
6times 0 1
9times 1 0
12times 1 1
1 EYE-Q check only 0 O receive and EYE-
Q check
1 Continues the
process.
0 Not continue the
process (Error).
1 Not error 0 Error
[06]SIMULATIONS ･ FAXSOFTWARESWITCH.fm 42 ページ ２００４年１１月１２日 金曜日 午後２時２４分