Specifications

AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-40
U.S.A.: U.S.A. CA: Canada U.K: U.Kingdom GR: German FR: France
64 4-8 DTMF send level
(High area)
Binary input
times on the line : ( - X + Offset) dBm
X (SW) : 0 - 21
Offset (Attenuation)
-2dB : North America
-1dB : Europe
00000Follow the
destination.
00000
11111
00111
00000
65 1-4 DTMF send MAX.
level
Binary input
Setting range 0 (0.0dBm) - 15 ( - 15.0dBm)
000000dBm
00000
00000
00000
5-8 DTMF send level
(Difference
between high area
and low area)
Setting range 0 (- 2.0dBm) - 15 ( + 5.5dBm) Step 0.5dBm 111112.0dBm
00000
00000
00000
66 1 Default date,
sender print
11111ON YES
2 Department name
notification
00000OFF YES
3 Date/sender print
position setting
00000Outside of
document
YES
4 Not used 00000
5 Department
number print
Used to set whether the department number (2-digit
serial number of department) or the department code
(department pass code, 5 digits) is described in the
“Department” column of the communication report and
the communication report table when the department
function is enable.
00000OFF
6-8 Polarity inversion
settlement time
Binary input
Setting range 200 - 1600ms
00000200ms
00000
00000
67 1-4 After sending CFR,
both wait is
inhibited for 1.6sec.
Binary input
Setting range 0 - 3000ms
111111600ms
00000
00000
00000
5 Communication
time measurement
(image)
11111YES
6 Reduction send
mode
00000ReductionYES
7ECM 11111YES
8ECM byte/frame 00000256 [bytes/
frame]
68 1 Recording paper
tray selection (tray
1)
11111ON YES
2 Recording paper
tray selection (tray
2)
11111ON YES
3 Recording paper
tray selection (tray
3)
11111ON YES
4 Recording paper
tray selection (tray
4)
11111ON YES
SW
No.
Bit
No.
Item Switch serection and function U.S.A. CA U.K GR FR Initial value Key operator
1ON 0OFF
1ON 0OFF
1 Inside of document 0 Outside of document
1ON 0OFF
1YES 0NO
1 Normal 0 Reduction
1YES 0NO
1 64 [bytes/frame] 0 256 [bytes/frame]
1ON 0OFF
1ON 0OFF
1ON 0OFF
1ON 0OFF
[06]SIMULATIONS ･ FAXSOFTWARESWITCH.fm 40 ページ ２００４年１１月１２日 金曜日 午後２時２４分