Specifications

AR-FX11 SPECIFICATIONS 3-1
[3] SPECIFICATIONS
1. Fax Function Specification
(1) Original
(2) Compression Method
(3) Image Process
(4) Specified Destination
(5) Specified Multiple Destinations
(6) Functions
Original stack capacity 40 sheets.
Scan cycle 23opm.
MH, MR, MMR, JBIG.
Half tone reproduction Equivalent to 256 levels.
Exposure adjustment Auto and Manual (5 steps).
Resolution STANDARD (8dot/mm x 3.85line/mm).
FINE (8dot/mm x 7.7line/mm).
SUPER FINE (8dot/mm x 15.4line/mm).
ULTRA FINE (16dot/mm x 15.4line/mm).
Specified destination Specified by Dial, Rapid, Speed or Group
destination entry.
Rapid keys(Max.
number of keys to be
stored)
50 destinations (including Group).
Speed 300.
Program Yes (9).
Manual destination
entry
Input via the numeric keys.
Chain dialing Yes (Pause Key).
Redial The number last entered through the only
single address sending is stored (Except time
setting, Sub address and Passcode).
Speed dialing This is used to recall address control number
by using numeric keys.
Specified destination Specified by Rapid, Group, Speed or manual
destination entry (Broadcasting is not allowed
when sub address is registered).
Broadcast
transmission
Yes(F code inputting from ten key is excepted
in the address containing F code).
Sequential
broadcasting
Yes (200 destinations).
Multi-polling Yes.
Transmit function Memory transmit Yes.
Speaker Yes.
Quick online
transmit
Ye s .
Direct transmit Yes.
Manual transmit With speaker.
R-Key Speaker Key is set to R-Key
(Only for SEEG).
Auto reduction
transmit
Yes(Original is reduced and
sent according to the receiving-
side machine).
Rotation transmit Yes.
Scaling transmit Yes (Scaling from regular size
to regular size only. No rotation
enlargement allowed).
Recall
mode
Error Yes.
Busy Yes.
Number of times/interval is set
via Key operator program.
Book original
transmit
Ye s .
Long length
original transmit
Ye s .
Max.800m.
Verification stamp No.
Transmit function Maximum number
of sender
registered
1 sender.
Maximum number
of transmission
reserved
50 jobs.
Receive function Auto receive Yes.
Manual receive Yes.
Memory receive Yes.
Reduction receive
for standard size
Ye s .
Rotation receive Yes.
Divided receive Yes: To be defined by Key
operator program.
Duplex receive Yes.
2 in 1 receive No.
Only designated
number receiving
enabled
No.
Enter junk fax
number
Yes (Up to 50numbers,
20digits).
External phone
connection
Ye s .
Answering phone
connection
No (To avoid patent
infringement).
Transfer function
at output trouble
Ye s .
Auto startup
mode
No.
Special function Time setting Yes.
Transmit request Yes.
Remote transmit Yes.
Cover function Yes.
Print at sender Yes (Always ON) (On/Off is
possible to set only for Japan).
Page division Yes.
Page combination No.
Confidential
(machine at the
other end)
Yes (F code method).
Relay broadcast
direction
Yes (F code method).
Transmit
message
Ye s .
Edge erase No.
Center erase No.
Multi shot No.
Card shot No.
Report/List
function
Confidential
receive check list
Ye s .
Program list Yes.
Relay group list No.
ID sender list No.
Transmit/receive
record
Ye s .
Reserved
transmit list
Ye s .
Original storage
check list
Ye s .
Rapid dial list Yes.
Speed dial list Yes.
Group dial list Yes.
Phone directory
list
Ye s .
Key operator
program list
Ye s .
Confidential ID list No.
F-code setting
check list
Ye s .
Account number
list
No.
[03]SPECIFICATIONS.fm 1 ページ ２００４年１１月１６日 火曜日 午前９時１１分