Specifications

AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-32
U.S.A.: U.S.A. CA: Canada U.K: U.Kingdom GR: German FR: France
34 1,2 Report output
(receive)
00000Print DisableYES
00000
3,4 Report output
(send)
When this item is set to a value outside the setting range,
it is regarded as the initial value.
11111Only in a
send error
YES
00000
5 Report output
(confidential
receive)
11111Print YES
6,7 Report output
(sequential
broadcast,
sequential send
request, interface
broadcast send)
00000All print YES
11111
8 Report output in
cancel
00000Not outputYES
35 1 Automatic
reduction print
11111Enable YES
2 Paper selection
priority order
00000Priority on
the area
3,4 Output condition
setting
When this item is set to a value outside the setting range,
it is regarded as the initial value.
00000Reduction
Enable
YES
00000
5-8 Automatic
reduction
magnification ratio
Binary input
Setting range 0 - 15%
000006%
11111
11111
00000
36 1-4 PC-FAX job end
wait time
Binary input
Setting range 0 (32min) - 15 (2min)
111112min
11111
11111
11111
5 Not used 00000
6 Display time out
setting
Used to set whether the FAX mode display time out is
fixed to 1 min or it is linked with the key operation setting
(however, less than 1 min is regarded as 1 min).
00000Fixed (1 min)
7,8 Not used 00000
00000
37 1 Not used 00000
2 1m scan
specification when
no rotation send
setting
00000Normal
operation
SW
No.
Bit
No.
Item Switch serection and function U.S.A. CA U.K GR FR Initial value Key operator
Bit No. 1 2
Print Disable 0 0
All print 0 1
Only in an error 1 0
Bit No. 3 4
Print Disable 0 0
All print 0 1
Only in a send error 1 0
1 Print 0 Not print
Bit No. 6 7
Print Disable 0 0
All print 0 1
Only for the destination of send error 1 0
1 Output 0 Not output
1 Enable 0 Disable
1 Priority on the width 0 Priority on the area
Bit No. 3 4
Reduction Enable 0 0
Normal 0 1
Division Enable 1 0
1 Variable (Linked with
key operation)
0 Fixed (1 min)
1 1m scan
specification
0 Normal operation
[06]SIMULATIONS ･ FAXSOFTWARESWITCH.fm 32 ページ ２００４年１１月１２日 金曜日 午後２時２４分