Specifications

AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-18
66 33 Signal detection check
Used to detect signals and display the result with ON/OFF.
34 Communication time measurement
Used to perform a send/receive test and measure and display the time required for send/receive of the
image data in the communication.
Main
code
Sub
code
Contents Remark
CI : FNET:
EXEC
Sim66-33 SIGNAL CHK
CNG : CED :
BT : DT :
EXEC
Sim66-33 SIGNAL CHK
1:CI FNET
2:CNG CED BT DT
3:Flag SDT DTMF
(1 - 3) X
Sim66-33 SIGNAL CHK
Flag: SDT :
DTMF:
EXEC
OK
Sim66-33 SIGNAL CHK
CI :OFF FNET:OFF
DETECT EXEC
Sim66-33 SIGNAL CHK
CNG :OFF CED :OFF
BT :OFF DT :OFF
DETECT EXEC
Sim66-33 SIGNAL CHK
Flag:OFF SDT :OFF
DTMF:OFF
DETECT EXEC
Sim66-33 SIGNAL CHK
After selection with 10-key
OK
After pressing OK key,
during execution
OK
After pressing OK key,
during execution
OK
After pressing OK key,
during execution
SIM66-33 initial window SIM66-33 initial window SIM66-33 initial window
1:CI FINET
2:CNG CED BT DT
3:Flag SDT DTMF
Return Return Return
CA key : Simulation cancel
Interrupt key : Sub code input window
C key : Input clear
10-key : Item selection
ON key : Input value settlement and execution
START key : Similar to OK key
Signal detection
YES/NO is displayed
with ON/OFF.
Signal detection
YES/NO is displayed
with ON/OFF.
Signal detection
YES/NO is displayed
with ON/OFF.
Sim66-34 COMM. TIME
OK
Sim66-34 COMM. TIME
EXEC
COMM. TIME:
xxx:xx:xx:xxxms
Simulation code input window
CA key : Simulation cancel
Interrupt key : Sub code input window
OK key : Settlement
Return key : Simulation code input window
START key : Settlement
C key : Disable
Immediately after pressing OK key,
the window shifts to the next one.
Return
[06]SIMULATIONS ･ FAXSOFTWARESWITCH.fm 18 ページ ２００４年１１月１２日 金曜日 午後２時２４分