Specifications

AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-15
66 17 DTMF signal send
Used to select the signal send level from 0dB and the soft SW set values and specify a dial number to be
sent. The DTMF signal of the specified dial number is sent continuously until the interrupt command is made
by pressing RETURN key. When another dial number is specified during sending of the signal, the signal
send level is returned to the soft SW set value before execution of the mode after completion of the mode.
19 SRAM backup
Used to back up and restore the SRAM contents.
Main
code
Sub
code
Contents Remark
Sim66-17 DTMF SIG.
Sim66-17 DTMF SIG.
Sim66-17 DTMF SIG.
1:MAX
2:SOFT SW.
( 1-2 ) X
OK
INPUT DIAL #
X
EXEC
CA key : Simulation cancel
Interrupt key : Sub code input window
C key : Input clear and stop
10-key : Item selection, dial number input
OK key : Input value settlement and execution
START key : Input value settlement and execution
RETURN key : Signal send stop
SENDING SIGNAL
X
PRESS BACK TO STOP
EXEC
OK
After selection with 10-key
The 10-key input enters the third digit.
Completion of execution (Highlighted during execution)
SIM66-17 initial window
Return
Sim66-19 BACK UP
Sim66-19 BACK UP
NO DATA
OK
SRAM BACK UP
ARE YOU SURE?EXEC
Sim66-19 BACK UP
WRONG FAX VER.
OK
RETURN key
Sim66-19 BACK UP
1:SRAM BACK UP
2:SRAM RESTORE
( 1-2 ) X
Sim66-19 BACK UP
SRAM BACK UP
FINISHED
Sim66-19 BACK UP
SRAM BACK UP
PRESS BACK TO STOP
SENDING EXEC
OK
OK
After inputting
1 or 2
After pressing OK key,
during execution
Completion of execution
(Highlighted during execution)
After pressing OK key,
during execution
After pressing OK key,
during execution
SIM66-19 initial window
SIM66-19 initial window
SIM66-19 initial window
Return
Return
CA key : Simulation cancel
Interrupt key : Sub code input window
10-key : Item selection
OK key : Execution
START key : Settlement of the input value
Return key : Returns to the selection window.
C key : Disable
[06]SIMULATIONS ･ FAXSOFTWARESWITCH.fm 15 ページ ２００４年１１月１２日 金曜日 午後２時２４分