Specifications

AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-13
66 11 300bps signal send
Used to send the specified signal at the speed of 300bps by setting the signal number. (Signal send is
continued until interruption is instructed by pressing RETURN key.) The signal send level is selected from
0db and soft switch set values. The signal send level is returned to the sot SW set value before execution of
the mode after completion of the mode.
Main
code
Sub
code
Contents Remark
Sim66-11 300bps SIG.
Sim66-11 300bps SIG.
OK
Sim66-11 300bps SIG.
Sim66-11 300bps SIG.
SIGNAL LEVEL
1:MAX
2:SOFT SW.
( 1 - 2 ) X
1:NO SIG. 4:00000
2:11111 5:010101
3:11110 6:00001
( 1 - 6 ) X
OK
NO SIGNAL
EXEC
SIM66-11 initial window
CA key : Simulation cancel
Interrupt key : Sub code input window
C key : Input clear
keys : Page switch
10-key : Item selection
OK key : Input value settlement and execution
START key : Input value settlement
RETURN key : Signal send stop
OUTPUTING SIGNAL
PRESS BACK TO STOP
EXEC
OK
After selection
with 10-key
After selection
with 10-key
After pressing OK key,
during execution
Return
[06]SIMULATIONS ･ FAXSOFTWARESWITCH.fm 13 ページ ２００４年１１月１２日 金曜日 午後２時２４分