Specifications

AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-12
66 7 Image memory content print
Used to print all the image data (confidential receive contents, remote send images, and images which are
not sent yet) in the image memory of the FAX section. The printed images are remained in the memory after
printing.
10 Image memory contents clear
Used to clear all the image data (including confidential receive contents) in the image memory of the FAX
section. The management table is also cleared (initialized) at the same time.
Main
code
Sub
code
Contents Remark
1sec later
1sec later
1sec later
CA key : Simulation cancel
Interrupt key : Sub code input
window
OK key : Settlement
START key : Settlement
C key : Disable
Return key : Disable
Sim66-7 PRINT MEMORY
Sim66-7 PRINT MEMORY
Sim66-7 PRINT MEMORY
PRINT STORED
OK
PRINT IMAGE MEMORY
EXEC
NO DATA
Sim66-7 PRINT MEMORY
CAN NOT PRINT
OK
OK
(When there is no image memory)
Sim66-10 IMAGE CLR
OK
Sim66-10 IMAGE CLR
Sim66-10 IMAGE CLR
CLEAR IMAGE MEMORY
ARE YOU SURE? EXEC
CLEAR IMAGE MEMORY
EXEC
CLEARED IMAGE MEM.
DO POWER OFF
Sim66-10 IMAGE CLR
CLEARED
Power source OFF/ON
Simulation code input window
Completion of execution
(Highlighted during execution)
Completion of execution
(Highlighted during execution)
After pressing OK key,
during execution
With prints
Without prints
CA key : Simulation cancel
Interrupt key : Sub code input
window
OK key : Settlement
Return key : Simulation code input window
START key : Settlement
C key : Disable
Return
[06]SIMULATIONS ･ FAXSOFTWARESWITCH.fm 12 ページ ２００４年１１月１２日 金曜日 午後２時２４分