Specifications

AR-FX11 SIMULATIONS, FAX SOFTWARE SWITCH 6-9
50 9 FAX lead edge adjustment (print)
Used to adjust and set the FAX print lead edge position and scan and print the document.
66 1 FAX soft SW setting
Used to display the FAX-related soft SW on the LCD and set and change the soft SW setting with 10-key
input.
Main
code
Sub
code
Contents Remark
Sim50-9 PRINT EDGE
Sim50-9 PRINT EDGE
OK
Sim50-9 PRINT EDGE
Sim50-9 PRINT EDGE
Sim50-9 PRINT EDGE
1:LEAD EDGE XX
2:LEFT EDGE XX
3:REAR EDGE XX
( 1 - 6) X
LEAD EDGE/R XX
( 43- 57) YY
OK
LEAD EDGE/R XX
EXEC
LEAD EDGE/R XX
SCAN EXEC
LEAD EDGE/R XX
PRINT EXEC
Sim50-9 PRINT EDGE
4:
LEAD EDGE/R XX
5:
LEFT EDGE/R XX
6:
REAR EDGE/R XX
( 1 -6 ) X
After input
1 - 6
After input
43 - 57
Sim66-1 FAX SOFT SW
ENTER FAX SOFT SW.#
( 3DIGITS ) XXX
Sim66-1 FAX SOFT SW
XXX is the input value of the soft SW number.
OK
No.XXX XXXXXXXX
USE # KEY 12345678
Sim66-1 FAX SOFT SW
No.XXX XXXXXXXX
To the initial window of SIM66-1
1sec later
CA key : Simulation cancel
Interrupt key : Sub code input window
10-key : Soft SW input
bit No. input
OK key : Settlement of the input value
START key : Settlement of the input value
C key : Input number clear for soft SW number input,
disable for the following windows
OK
[06]SIMULATIONS ･ FAXSOFTWARESWITCH.fm 9 ページ ２００４年１１月１２日 金曜日 午後２時２４分