Specifications

AR-F14/PN1 SIMULATIONS 10-1
[10] SIMULATIONS
1. Finisher/Saddle unit
2. Puncher unit (option)
Error Condition Timing of detection Operation Resetting
Staple absent The stapler is not set. Monitoring at all times The staple/fold motor (FFSM) and the
slide motor (FSM) will stop.
Set the stapler.
Staple absent The staple cartridge has run out of
staples.
Monitoring at all times Normal operation will continue;
however, operation is subject to
instructions from the host machine.
Replace the staple
cartridge;
or, set it correctly.
Mixed sheets Sheets of different sizes are deposited
in the compartment.
When a sheet of a
different size is placed.
The sheet will be aligned based on
maximum size width and delivered as a
stack.
-
Overstacking for
stapling
The number of sheets in the
compartment has exceeded the limit
imposed on stapling.
When an extra sheet is
placed.
The sheets will be delivered with
stapling. -
Stack tray
overstacking
The number of sheets deposited on the
delivery tray has exceeded the limit
imposed on the tray (sheets, sets).
When an extra sheet is
placed.
Normal operation will continue. Remove the sheets
from the delivery tray.
Saddle overstacking Remove the stack from the bind tray.
More than 10 stacks are deposited on
the folded stack tray.
When an extra sheet is
placed.
Normal operation will continue. Remove the stack from
the bind tray.
Error Condition Timing of detection Operation Resetting
Waste case full The amount of waste paper in the
waste case has reached the limit.
During punching. Normal operation will continue. Remove the waste
paper from the waste
case.
Excess water The amount of waste paper in the
waste case has exceeded the limit.
During punching. Punching will be disabled. Remove the waste
paper from the water
case.
[10]SIMULATIONS.fm 1 ページ ２００４年４月１９日 月曜日 午後１時４２分