Specifications

AR-F14/PN1 TROUBLE SHOOTING 9-2
3. Troubleshooting
A. Finisher/saddle unit
(1) F1-03, Paddle Motor Fault (detail code: 01/02/03/04)
(2) F1-10, Staple/fold Motor Fault
F1 34 Content Console finisher (AR-F14)
punch (AR-PN1) motor trouble
Detail Punch motor operation abnormality
Cause Motor lock
Motor rpm abnormality
Overcurrent to the motor
Console finisher control PWB trouble
Check and
remedy
Use DIAG (SIM3-3) to check the motor
operation.
35 Content Console finisher (AR-F14)
punch (AR-PN1) side registration sensor
trouble
Detail Sensor input value abnormality
Cause Sensor breakage
Harness disconnection
Console finisher control PWB trouble
Check and
remedy
Use DIAG (SIM3-2) to check the sensor
operation.
36 Content Console finisher (AR-F14)
punch (AR-PN1) timing sensor trouble
Detail Sensor input value abnormality
Cause Sensor breakage
Harness disconnection
Console finisher control PWB trouble
Check and
remedy
Use DIAG (SIM3-2) to check the sensor
operation.
37 Content Console finisher (AR-F14)
backup RAM trouble
Detail Backup RAM contents are disturbed.
Cause Console finisher control PWB trouble
Malfunction by noise
Check and
remedy
Replace the console finisher control PWB.
F1 38 Content Console finisher (AR-F14)
punch (AR-PN1) backup RAM trouble
Detail Punch unit backup RAM contents are
disturbed.
Cause Punch control PWB trouble
Malfunction by noise
Check and
remedy
Replace the punch control PWB.
39 Content Console finisher (AR-F14)Punch sensor
trouble (AR-PN1)
Detail Sensor input abnormality
Cause Sensor breakage harness disconnection
console finisher control PWB defect
Check and
Remedy
Sensor operation check in diag (SIM 3-2)
40 Content Console finisher (AR-F14)Puncher section
power trouble (AR-PN1)
Detail Puncher operation abnormality
Cause Punch control PWB defect
Check and
Remedy
Punch control PWB replacement
53 Content Console finisher (AR-F14)Interface transport
unit connection trouble
Detail Connection error between console finisher
and interface transport unit
Cause Improper connection of connector between
console finisher and interface transport unit
Check and
Remedy
Check the interface transport unit connector.
81 Content Console finisher transport motor abnormality
Detail Transport motor trouble
Cause Motor lock
Motor rpm abnormality
Overcurrent to the motor
Console finisher control PWB trouble
Check and
remedy
Use DIAG (SIM3-3) to check the motor
operation.
Cause/Trouble section Procedure Check Result Remedy
Paddle home position sensor (PHPS) 1 Check the paddle home position sensor. Is the sensor normal? NO Replace the sensor
Swing guide home position sensor
(ARHPS)
2 Check the swing guide home position sensor.
Is the sensor normal?
NO Replace the sensor.
Wiring 3 Is the wiring between the finisher controller PCB and the paddle
motor normal?
NO Correct the wiring.
Paddle, Swing guide assembly 4 Try turning the paddle motor clockwise and counterclockwise by
hands. Is there mechanical tapping in the rotation of the paddle
or the up/down movement of the swing guide?
YES Correct the
mechanical
mechanism.
Paddle motor (FPM),
finisher controller PCB
5 Try replacing the paddle motor. Is the problem corrected? YES End.
NO Replace the finisher
controller PCB.
Cause/Trouble section Procedure Check Result Remedy
Wiring 1 Is the wiring between the finisher controller PCB and the staple/
fold motor normal?
NO Correct the wiring.
Stapler unit 2 Try turning the staple jam releasing dial.
Is there mechanical trapping?
YES Correct the
mechanical system.
Staple/fold motor (FFSM),
Finisher controller PCB
3 Try replacing the staple/fold motor. Is the problem corrected? YES End.
NO Replace the finisher
controller PCB.
[09]TROUBLESHOOTING.fm 2 ページ ２００４年４月１９日 月曜日 午後１時４２分