Specifications

AR-F14/PN1 MAINTENANCE 6-1
[6] MAINTENANCE
1. Maintenance System Table
2. Discarding punch waste (when a punch unit is installed)
1) Press the detach button and separate the saddle stitch finisher from
the machine.
Caution: The saddle stitch finisher and the machine are connected at
the rear. Exercise caution when pulling them apart.
2) Gently pull the punch waste receptacle forward and discard the
punch waste.
Empty the punch waste receptacle into a garbage bag or other container,
taking care not to let punch waste scatter.
3) Replace the punch waste receptacle.
4) Push the saddle stitch finisher back onto the machine.
Check (Clean, replace, or adjust as necessary.) Clean Replace Adjust Lubricate Move position
Unit name Part name
When
calling
75K 150K 225K 300K 375K 450K Remark
Transport section Transport rollers
Transport paper
guides
Drive section Gears (Specified position)
Belts
Other Sensors
Discharge brush
Staple un Replace UN at 100K staple.
Staple cartridge User replacement for every 3000pcs.
[06]MAINTENANCE.fm 1 ページ ２００４年４月１９日 月曜日 午後１時４０分