Specifications

AR-F14/PN1 INTRODUCTION 1-1
[1] INTRODUCTION
1. Product outline
This unit is installed to the following machines to perform the after-process of output paper from a copier, or a fax machine.
1) Employment of the through-type stapler
Employment of the through-type stapler allows to make saddle stitch by one stapler.
2) 3 kinds of auto staple functions
There are 3 staple positions available. (One position in the front, one position at the back, 2 positions at the center)
3) Saddle stitch function
Up to 10 sheets of paper can be stapled at the center and folded into two and discharged.
4) Punch function (Option)
By installation of a puncher unit, paper can be punched to make holes for a binder. (Applicable for 64 - 128g/m². OHP films cannot be used.)
2. Configuration
1. When installing this machine, the exclusive-use table (large) or the exclusive-use table (small) + the multi-stage paper feed unit
(AR-D21 or AR-D22) must be attached to in advance.
2. This unit cannot be installed with the following units:
•Finisher (AR-FN5N)
3. Specifications
A. AR-F14
(1) Basic specifications
(2) Finishing section
(3) Saddle stitch section
B. AR-PN1
4. Consumable parts
Applicable models AR-M237 / M277, AR-M236 / M276
Type Console type finisher
Transport speed 23/26/27 ppm
Transport reference Center reference
Tray type
(Number of trays)
Upper tray Lift-up/down offset tray
Lower tray Book tray for saddle stitch
Paper exit direction Face down
Paper exit paper size A3, B4, A4, A4R, B5, B5R, A5,
11" x 17", 8.5" x 14", 8.5" x 13",
A5/Invoice R inhibited
A5/Invoice horizontal allowed
8.5" x 11", 8.5" x 11"R,
5.5" x 8.5"
Power consumption 60W or below
Power source Supplied from the machine power
(DC24V, 2.5A)
External dimensions (W x D x H) 661 x 603 x 1016 (mm)
Occupying dimensions (W x D) 712 x 603 (mm)
Weight About 38kg
Capacity of
paper exit and
load
Non-staple *1,000 sheets (Small size)
500 sheets (Large size)
Staple sort *30 sheets
* Equivalent to 64g/m² of paper
Max 1,000 sheets (Small size)
500 sheets: (Large size)
Less than 1,000 sheets and less than 30 copies
depending on the use environment and paper curl.
Large size A3, B4,
11" x 17", 8.5" x 14", 8.5" x 13"
Small size A4R, B5, B5R, A5,
8.5" x 11", 8.5" x 11"R, 5.5" x 8.5"R
Offset function Provided
Paper size which
can be stapled
A3, B4, A4, A4R, B5, B5R,
11" x 17", 8.5" x 14", 8.5" x 13", 8.5" x 11",
8.5" x 11"R
Kinds and
weights of paper
to be discharged
Normal paper 60 - 128g/m² (16 - 34lbs)
Index paper 176g/m² (47lbs)
Cover paper 200 g/m² (54lbs)
Quantity of paper
to be stapled
(Max.)
50 sheets
(Small size, 128g/m² x 2 + 80g/m² x 48)
25 sheets (Large size, 80g/m² x 25)
Large size A3, B4,
11" x 17", 8.5" x 14", 8.5" x 13"
Small size A4, A4R,
8.5" x 11", 8.5" x 11"R, B5, B5R
Stapling 3 kinds
(One in the front, one at the back: two positions)
two positions A3, B4, 11" x 17", 8.5" x 14",
8.5" x 13", A4, 8.5" x 11", B5, B5R
one at the back A3, B4, A4, A4R, B5, B5R
one in the front 11" x 17", 8.5" x 14", 8.5" x 13",
8.5" x 11", 8.5" x 11"R, B5, B5R
Staple supply Staple cartridge replacement
Staple detection Staple empty
detection
Provided
Cartridge
empty
detection
Provided
Staple jam
detection
Provided
Stapling type Center stapling: Center folding
Stapling position 120mm pitch from the paper center
Weight of paper applicable for
saddle stitch
A3, A4R, B4,
11" x 17", 8.5" x 11"R
Paper size 64 - 80g/m²
(Cover: 64 - 128g/m²)
Book tray stacking type Fixed
Quantity of paper to be stapled 10 sets (6 - 10 pages)
20 sets (1 - 5 pages)(80g/m²)
Type Punch unit
No. of punch holes AR-PN1A AR-PN1B AR-PN1C AR-PN1D
2 holes 2 / 3holes 4 holes 4 holes
Size of paper
applicable for punching
Max. A3, Min. B5R
Name Content Life Product
name
Remark
Staple cartridge Staple cartridge x 3 5000 x 3 AR-SC2
[01]INTRODUCTION.fm 1 ページ ２００４年４月２８日 水曜日 午後４時５９分