Specifications

AR-F14/PN1 OPERATIONAL DESCRIPTION 4-6
Fig.F02-202-02
Table.T02-202-02
C.Job Offset
(1)Outline
"Job offset" refers to the operation by which the machine delivers a set of
sheets with them pulled forward or backward for sorting.
Switching between the forward and backward directions is made using
an aligning plate (front) and an aligning plate (rear).
The sheet coming between the delivery rollers is fed onto the processing
tray and then fed toward the stopper by the paddle.
A swing guide is at the up position while a sheet is being pulled onto the
processing tray or during alignment. It is at the down position during
stack feeding, stack delivery, or stapling.
At power-on, the finisher controller PCB drives the aligning plate (front)
motor (FFJM) and the aligning plate (rear) motor (FRJM) to return the
two aligning plates to their home positions.
Table.T02-203-01
Fig.F02-203-01
(2)Processing Tray Paper Stacking Operation
A sheet coming between the delivery rollers is fed onto the processing
tray.Then, the paddle taps on the sheet surface twice (once for the
second and subsequent sheets) to locate the sheet against the
processing tray stopper.
Fig.F02-203-02
(3)Offset Operation
Each sheet is pulled forward or backward using the aligning plate (front)
and the aligning plate (rear).
The offset operation is performed each time a sheet is pulled onto the
processing tray.
Offsetting in the forward direction
Fig.F02-203-03
Notation Name Description Connector on finisher
controller PCB
ES Inlet sensor Photointerrupter CN16
FPS Fold position sensor Photointerrupter CN16
Sensor Symbol Connector Function Motor Symbol
Aligning plate
(front) home
position sensor
FJHPS CN4-3 Drives the
aligning plate
(front)
Aligning
plate
(front)
motor
FFJM
Aligning plate
(rear) home
position sensor
RJHPS CN5-15 Drives the
aligning plate
(rear)
Aligning
plate
(rear)
motor
FRJM
Swing guide
home position
sensor
ARHPS CN9-9 Drives the
swing guide
drive.
Paddle
motor
FPM
Paddle home
position sensor
PHPS CN9-3 Drives the
paddle
(feeds paper).
Paddle
motor
FPM
Finisher controller PCB
FPS
Fold position paper detect signal BIND_P
ES
Inlet paper detect signal ENT_P
Aligning plate
(front)
Alignment plate (front)
motor (FFJM)
Alignment plate (rear)
motor (FRJM)
Light-shielding plate
(Front)
Paper
Aligning plate (front) home position sensor (FJHPS)
Light-shielding plate
Aligning plate (rear)
home position sensor (RJHPS)
Aligning plate (rear)
Swing guide
Delivery belt
Stack delivery roller (lower)
Processing tray stopper
Paddle
Stack delivery roller (upper)
Aligning plate
Paper
Aligning plate (rear)
Sheet to be offset
Tray
Aligning plate (front)
[04]OPERATIONALDESCRIPTION.fm 6 ページ ２００４年４月１９日 月曜日 午後１時３７分