Specifications

AR-F14/PN1 OPERATIONAL DESCRIPTION 4-4
2. Feed/Drive System
A. Outline
The machine performs the following in response to the commands
coming from its host machine on the sheets arriving from the host
machine for delivery: simple stacking, job offset, and stapling or folding
(in two).
If a punch unit (option) is installed, the sheets are pouched and delivered
to the delivery tray.
Sheets may be delivered in either of five ways (including one for the
puncher unit):
Fig.F02-201-01
(1)Normal Delivery
a.Simple Stacking
The machine pulls in the sheet once to the processing tray and then
delivers it to the delivery tray.
Fig.F02-201-02
b.Job Offset
The machine pulls the sheet once to the processing tray. It then moves
the sheet to the front or the rear using the aligning plate. When it has
deposited a specific number of sheets, it delivers them in the form of a
aligning plane. When the number of sheets stacked on the processing
tray reaches a specified value, the sheets are delivered in a form of a
stack. Even if the specified value is not reached, stacked sheets are
temporarily delivered when 10 sheets of large-size paper (300 mm or
longer) or 30 sheets of small-size paper (299 mm or shorter) have been
stacked. (5- and STMT-sizes: 10 sheets)
Fig.F02-201-03
c.Stapling
The machine stacks sheets coming from its host machine on the
processing tray. When the number of sheets stacked on the processing
tray reaches a specified value, the finisher staples them delivers the
stapled stack to the delivery tray.
Fig.F02-201-04
PunchingNormal
delivery
Delivery
method
Middle 2-point stapling
Job offset
Simple stacking
Stapling Front 1-point stapling
Rear 1-point stapling
Middle 2-point stapling
StitchingSaddle delivery
Tra y
Paper
4th set
(direction of delivery)
Results of offset delivery (4 jobs)
2nd set
3rd set
1st set
[04]OPERATIONALDESCRIPTION.fm 4 ページ ２００４年４月１９日 月曜日 午後１時３７分